Publication Details

  • Agarwal, S., & Rao, P. V. (2008). Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SiC grinding. International Journal of Machine Tools and Manufacture, 48(6), 698-710. (cited 65 times) 
  • Anand, R. B., Singh, S. N., & Rai, L. (2008). Effect of swirl on the flow characteristics of S-shaped diffusing duct. Indian Journal of Engineering and Materials Sciences, 15(4), 317-325.  
  • Aravindan, S., Sait, A. N., & Haq, A. N. (2008). A machinability study of GFRP pipes using statistical techniques. International Journal of Advanced Manufacturing Technology, 37(11-12), 1069-1081.
  • Arshinder, Kanda, A., & Deshmukh, S. G. (2008). Supply chain coordination: Perspectives, empirical studies and research directions. International Journal of Production Economics, 115(2), 316-335. (cited 323 times)
  • Balakrishnan, M., Paul, K., Garg, A., Paul, R., Mehra, D., Singh, V., . .Rao, P.V.M., Manocha, D. (2008). Cane mounted knee-above obstacle detection and warning system for the visually impaired. Paper presented at the 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007, , 4 143-151.  
  • Barve, A., Kanda, A., & Shankar, R. (2008). Making 3PL effective in agile supply chains. International Journal of Logistics Systems and Management, 4(1), 40-60.  
  • Bhatnagar, N., Jalutharia, M. K., & Singh, I. (2008). Prediction of thrust force and torque when drilling composite materials. International Journal of Materials and Product Technology, 32(2-3), 213-225.
  • Bouchart, V., Bhatnagar, N., Brieu, M., Ghosh, A. K., & Kondo, D. (2008). Study of EPDM/PP polymeric blends: Mechanical behavior and effects of compatibilization. Comptes Rendus - Mecanique, 336(9), 714-721.  
  • Chak, S. K., & Venkateswara Rao, P. (2008). The drilling of Al2O3 using a pulsed DC supply with a rotary abrasive electrode by the electrochemical discharge process. International Journal of Advanced Manufacturing Technology, 39(7-8), 633-641.  
  • Chan, F. T. S., Bhagwat, R., & Wadhwa, S. (2008). Comparative performance analysis of a flexible manufacturing system (FMS): A review-period-based control. International Journal of Production Research, 46(1), 1-24.  
  • Chan, F. T. S., Wang, Z., Zhang, J., & Wadhwa, S. (2008). Two-level hedging point control of a manufacturing system with multiple product-types and uncertain demands. International Journal of Production Research,46(12), 3259-3295.  
  • Chander, S., & Ray, A. (2008). An experimental and numerical study of stagnation point heat transfer for methane/air laminar flame impinging on a flat surface. International Journal of Heat and Mass Transfer, 51(13-14), 3595-3607.  
  • Chaudhary, H., & Saha, S. K. (2008). An optimization technique for the balancing of spatial mechanisms. Mechanism and Machine Theory, 43(4), 506-522.  
  • Chaudhary, H., & Saha, S. K. (2008). Balancing of shaking forces and shaking moments for planar mechanisms using the equimomental systems. Mechanism and Machine Theory, 43(3), 310-334.
  • Chawla, A., Mukherjee, S., & Iyer, S. K. (2008). Use of optimisation to position dummies in crash simulations. Journal of the Institution of Engineers (India): Mechanical Engineering Division, 89(JULY), 42-46.  
  • Chawla, A., Mukherjee, S., Soni, A., & Malhotra, R. (2008). Effect of active muscle forces on knee injury risks for pedestrian standing posture at low-speed impacts. Traffic Injury Prevention, 9(6), 544-551.  
  • Dangayach, S. C., & Deshmukh, S. G. (2008). Implementation of manufacturing strategy: A multisector study of the indian manufacturing industry. International Journal of Services and Operations Management, 4(1), 1-33.  
  • Darpe, A. K. & Patel, T. H., (2008), Transient Coupled Vibration Response of Cracked Rotor, Proceedings of the 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-12), Honolulu, Hawaii, February 17-22.
  • Das, A. S., & Dutt, J. K. (2008). Reduced model of a rotor-shaft system using modified SEREP. Mechanics Research Communications, 35(6), 398-407.  
  • Das, A. S., Nighil, M. C., Dutt, J. K., & Irretier, H. (2008). Vibration control and stability analysis of rotor-shaft system with electromagnetic exciters. Mechanism and Machine Theory, 43(10), 1295-1316.
  • Desai, K. A., & Rao, P. V. M. (2008). Effect of direction of parameterization on cutting forces and surface error in machining curved geometries. International Journal of Machine Tools and Manufacture, 48(2), 249-259.  
  • Dilbag, S., & Rao, P. V. (2008). Performance improvement of hard turning with solid lubricants. International Journal of Advanced Manufacturing Technology, 38(5-6), 529-535.  
  • Garnayak, D. K., Pradhan, R. C., Naik, S. N., & Bhatnagar, N. (2008). Moisture-dependent physical properties of jatropha seed (jatropha curcas L.). Industrial Crops and Products, 27(1), 123-129.
  • Ghosh, S., Chattopadhyay, A. B., & Paul, S. (2008). Modelling of specific energy requirement during high-efficiency deep grinding. International Journal of Machine Tools and Manufacture, 48(11), 1242-1253.  
  • Gupta, T.C., Gupta, K. & Sehgal, D. K. (2008). Nonlinear vibration analysis of an unbalanced flexible rotor supported by ball bearings with radial internal clearance, ASME Turbo Expo 2008, Berlin, Germany, Paper No: GT2008-51204.
  • Jain, P. K., Pandey, P. M., & Rao, P. V. M. (2008). Experimental investigations for improving part strength in selective laser sintering. Virtual and Physical Prototyping, 3(3), 177-188.  
  • Jain, V., Benyoucef, L., & Deshmukh, S. G. (2008). A new approach for evaluating agility in supply chains using fuzzy association rules mining. Engineering Applications of Artificial Intelligence, 21(3), 367-385.  
  • Jain, V., Benyoucef, L., & Deshmukh, S. G. (2008). What's the buzz about moving from 'lean' to 'agile' integrated supply chains? A fuzzy intelligent agent-based approach. International Journal of Production Research,46(23), 6649-6677.  
  • Jitesh, T., Arun, K., & Deshmukh, S. G. (2008). An enquiry-analysis framework 'EBM-REP' for qualitative research. International Journal of Innovation and Learning, 5(5), 557-580.  
  • Jyoti, Banwet, D. K., & Deshmukh, S. G. (2008). Evaluating performance of national R and D organizations using integrated DEA-AHP technique. International Journal of Productivity and Performance Management, 57(5), 370-388.  
  • Kumar, K. S., Bhatnagar, N., & Ghosh, A. K. (2008). Mechanical properties of injection molded long fiber polypropylene composites, part 2: Impact and fracture toughness. Polymer Composites, 29(5), 525-533.  
  • Kumar, M., Kar, I. N., & Ray, A. (2008). State space based modeling and performance evaluation of an air-conditioning system. HVAC and R Research, 14(5), 797-816.  
  • Kumbhar, V. K., Pandey, P. M., & Rao, P. V. M. (2008). Improved intermediate point curve model for integrating reverse engineering and rapid prototyping. International Journal of Advanced Manufacturing Technology,37(5-6), 553-562.  
  • Lad, B. K., & Kulkarni, M. S. (2008). Integrated reliability and optimal maintenance schedule design: A life cycle cost based approach. International Journal of Product Lifecycle Management, 3(1), 78-90.
  • Mohan, M., Gandhi, O. P., & Agrawal, V. P. (2008). Real-time reliability index of a steam power plant: A systems approach. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy,222(4), 355-369.  
  • Murugan, R. S., & Subbarao, P. M. V. (2008). Effective utilization of low-grade steam in an ammonia-water cycle. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222(2), 161-166.  
  • Murugan, R. S., & Subbarao, P. M. V. (2008). Efficiency enhancement in a rankine cycle power plant: Combined cycle approach. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy,222(8), 753-760.  
  • Murugan, R. S., & Subbarao, P. M. V. (2008). Off-design performance prediction of steam turbines. Paper presented at the ASME International Mechanical Engineering Congress and Exposition, Proceedings, , 6 303-313.  
  • Murugan, R. S., & Subbarao, P. M. V. (2008). Thermodynamic analysis of rankine-kalina combined cycle. International Journal of Thermodynamics, 11(3), 133-141.  
  • Panda, S. K., & Kumar, D. R. (2008). Improvement in formability of tailor welded blanks by application of counter pressure in biaxial stretch forming. Journal of Materials Processing Technology, 204(1-3), 70-79.  
  • Patel, K. M., Pandey, P. M., & Rao, P. V. (2008). Understanding the role of weight percentage and size of silicon carbide particulate reinforcement on electro-discharge machining of aluminium-based composites.Materials and Manufacturing Processes, 23(7), 665-673.  
  • Patel, T. H., & Darpe, A. K. (2008). Influence of crack breathing model on nonlinear dynamics of a cracked rotor. Journal of Sound and Vibration, 311(3-5), 953-972.  
  • Patel, T. H., & Darpe, A. K. (2008). Vibration response of a cracked rotor in presence of rotor-stator rub. Journal of Sound and Vibration, 317(3-5), 841-865.  
  • Pradhan, R. C., Naik, S. N., Bhatnagar, N., & Swain, S. K. (2008). Moisture-dependent physical properties of karanja (pongamia pinnata) kernel. Industrial Crops and Products, 28(2), 155-161.
  • Prathap, C., Ray, A., & Ravi, M. R. (2008). Investigation of nitrogen dilution effects on the laminar burning velocity and flame stability of syngas fuel at atmospheric condition. Combustion and Flame, 155(1-2), 145-160. (cited 98 times)  
  • Raghunandan, R., & Venkateswara Rao, P. (2008). Selection of sampling points for accurate evaluation of flatness error using coordinate measuring machine. Journal of Materials Processing Technology, 202(1-3), 240-245.  
  • Rao, G. V. G., Mahajan, P., & Bhatnagar, N. (2008). Three-dimensional macro-mechanical finite element model for machining of unidirectional-fiber reinforced polymer composites. Materials Science and Engineering A,498(1-2), 142-149.  
  • Rao, T. V. V. L. N., & Athre, K. (2008). Active control on the stability of flexible rotor supported on journal bearings. Advances in Vibration Engineering, 7(3), 275-281.  
  • Ratna Kishore, V., Duhan, N., Ravi, M. R., & Ray, A. (2008). Measurement of adiabatic burning velocity in natural gas-like mixtures. Experimental Thermal and Fluid Science, 33(1), 10-16.
  • Roy, H., Dutt, J. K., & Datta, P. K. (2008). Dynamics of a viscoelastic rotor shaft using augmenting thermodynamic fields-A finite element approach. International Journal of Mechanical Sciences, 50(4), 845-853.  
  • Saini, P., Pandhi, A., & Darpe, A. K. (2008). An experimental study on the use of active constrained layer damping for thin curved smart shell structures. Paper presented at the CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Embodying Intelligence in Structures and Integrated Systems, , 56 309-314.  
  • Sait, A. N., Haq, N. A., & Aravindan, S. (2008). Experimental investigation on machining of filament wound GFRP pipe by cemented carbide (K20) cutting tool. International Journal of Machining and Machinability of Materials, 3(3-4), 364-381.  
  • Saminathan, K., Selvakumar, P., & Bhatnagar, N. (2008). Fracture studies of polypropylene/nanoclay composite. part I: Effect of loading rates on essential work of fracture. Polymer Testing, 27(3), 296-307.  
  • Saminathan, K., Selvakumar, P., & Bhatnagar, N. (2008). Fracture studies of polypropylene/nanoclay composite. part II: Failure mechanism under fracture loads. Polymer Testing, 27(4), 453-458.
  • Sathiya, P., Aravindan, S., & Haq, A. N. (2008). Some experimental investigations on friction welded stainless steel joints. Materials and Design, 29(6), 1099-1109.  
  • Sathiya, P., Aravindan, S., & Haq, A. N. (2008). Tensile properties of similar AISI 304 austenitic and AISI 430 ferritic stainless steels joined by friction welding. Multidiscipline Modeling in Materials and Structures, 4(2), 141-154.  
  • Senthilkumaran, K., Pandey, P. M., & Rao, P. V. M. (2008). Shrinkage compensation along single direction dexel space for improving accuracy in selective laser sintering. Paper presented at the 4th IEEE Conference on Automation Science and Engineering, CASE 2008, 827-832.  
  • Shahi, A. S., & Pandey, S. (2008). Effect of auxiliary preheating of the filler wire on quality of gas metal arc stainless steel claddings. Journal of Materials Engineering and Performance, 17(1), 30-36.
  • Shahi, A. S., & Pandey, S. (2008). Modelling of the effects of welding conditions on dilution of stainless steel claddings produced by gas metal arc welding procedures. Journal of Materials Processing Technology,196(1-3), 339-344.  
  • Sharma, R. K., & Pandey, R. K. (2008). Influence of surface profile on slider bearing performance. International Journal of Surface Science and Engineering, 2(3-4), 265-280.  
  • Sharma, R. K., & Pandey, R. K. (2008). Thermohydrodynamic analysis of infinitely wide cycloidal profiled pad thrust bearing with rough surface and a comparison to plane profiled pad. Lubrication Science, 20(3), 183-203.  
  • Sigh, R. K., Garg, S. K., & Deshmukh, S. G. (2008). Challeges and strategies for competitiveness of SMEs: A case study in the indian context. International Journal of Services and Operations Management, 4(2), 181-200.  
  • Singh, H., RAI, L., & Kale, S. R. (2008). A numerical study of the effect of roughness on the turbine blade cascade performance. Progress in Computational Fluid Dynamics, 8(7-8), 439-446.
  • Singh, I., Bhatnagar, N., & Viswanath, P. (2008). Drilling of uni-directional glass fiber reinforced plastics: Experimental and finite element study. Materials and Design, 29(2), 546-553.  
  • Singh, R. K., Garg, S. K., & Deshmukh, S. G. (2008). Strategy development by SMEs for competitiveness: A review. Benchmarking, 15(5), 525-547. (cited 96 times)  
  • Singh, S., Mukherjee, S., & Sanghi, S. (2008). Study of a self-impacting double pendulum. Journal of Sound and Vibration, 318(4-5), 1180-1196.  
  • Singh, S. K., Dixit, A., & Kumar, D. R. (2008). Optimization of the design parameters of modified die in hydro-mechanical deep drawing using LS-DYNA. International Journal of Advanced Manufacturing Technology, 38(1-2), 32-37.  
  • Singh, S. K., & Ravi Kumar, D. (2008). Effect of process parameters on product surface finish and thickness variation in hydro-mechanical deep drawing. Journal of Materials Processing Technology, 204(1-3), 169-178.  
  • Soni, A., Chawla, A., Mukherjee, S., & Malhotra, R. (2008). Response of lower extremity in car-pedestrian impact-influence of muscle contraction. Paper presented at the International Research Council on the Biomechanics of Injury - 2008 International IRCOBI Conference on the Biomechanics of Injury, Proceedings, 469-472.  
  • Soni, A., Mukherjee, S., & Chawla, A. (2008). Effects of boundary conditions in dynamic tests for pedestrian safety: A finite element simulation study. International Journal of Vehicle Safety, 3(3), 295-306.  
  • Sureshkumar, R., Kale, S. R., & Dhar, P. L. (2008). Heat and mass transfer processes between a water spray and ambient air - I. experimental data. Applied Thermal Engineering, 28(5-6), 349-360.
  • Sureshkumar, R., Kale, S. R., & Dhar, P. L. (2008). Heat and mass transfer processes between a water spray and ambient air - II. simulations. Applied Thermal Engineering, 28(5-6), 361-371.
  • Talukdar, P., Iskra, C. R., & Simonson, C. J. (2008). Combined heat and mass transfer for laminar flow of moist air in a 3D rectangular duct: CFD simulation and validation with experimental data. International Journal of Heat and Mass Transfer, 51(11-12), 3091-3102.  
  • Talukdar, P., Issendorff, F. V., Trimis, D., & Simonson, C. J. (2008). Conduction-radiation interaction in 3D irregular enclosures using the finite volume method. Heat and Mass Transfer/Waerme- Und Stoffuebertragung,44(6), 695-704.  
  • Talukdar, P., & Shah, M. (2008). Analysis of laminar mixed convective heat transfer in horizontal triangular ducts. Numerical Heat Transfer; Part A: Applications, 54(12), 1148-1168.  
  • Thakkar, J., Kanda, A., & Deshmukh, S. G. (2008). A conceptual role interaction model for supply chain management in SMEs. Journal of Small Business and Enterprise Development, 15(1), 74-95.
  • Thakkar, J., Kanda, A., & Deshmukh, S. G. (2008). A decision algorithm for evaluating supply chain learning in small and medium-scale enterprises. International Journal of Value Chain Management, 2(3), 371-399.  
  • Thakkar, J., Kanda, A., & Deshmukh, S. G. (2008). Interpretive structural modeling (ISM) of IT-enablers for indian manufacturing SMEs. Information Management and Computer Security, 16(2), 113-136.
  • Upadhayay, M., Singh, S.P., & Waghmare, U.V. (2008). Carbon Nanotubes with an Extended Line Defect", Small, 4(12), 2209-2213.
  • Uthayakumar, M., Prabhaharan, G., Aravindan, S., & Sivaprasad, J. V. (2008). Machining studies on bimetallic pistons with CBN tool using the taguchi method - technical communication. Machining Science and Technology, 12(2), 249-255.  
  • Venu Gopala Rao, G., Mahajan, P., & Bhatnagar, N. (2008). Orthogonal machining of UD-CFRP composites. International Journal of Materials and Product Technology, 32(2-3), 168-187.  
  • Vikas, A., Singh, S. P., & Kundra, T. K. (2008). Use of damped updated FE model for predicting dynamic characteristics. Paper presented at the Conference Proceedings of the Society for Experimental Mechanics Series,  
  • Virk, G., Jain, V., Singh, M., & Rao, P. V. M. (2008). Conceptual design of a carbon nanotube based gearbox. Paper presented at the 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007, , 3 PART B 881-888.  
  • Wadhwa, S., Bibhushan, Bhoon, K. S., & Chan, F. T. S. (2008). Postponement strategies for re-engineering of automotive manufacturing: Knowledge-management implications. International Journal of Advanced Manufacturing Technology, 39(3-4), 367-387.  
  • Wadhwa, S., Ducq, Y., Saxena, A., & Prakash, A. (2008). Supply chain as a flexible system: A KM focused competence. Global Journal of Flexible Systems Management, 9(2-3), 15-30.  
  • Wadhwa, S., Saxena, A., & Chan, F. T. S. (2008). Framework for flexibility in dynamic supply chain management. International Journal of Production Research, 46(6), 1373-1404. (cited 65 times)