Publication Details

  • Agarwal, S., & Rao, P. V. (2011). Improvement in productivity in SiC grinding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225(6), 811-830.
  • Ambad, P. M., & Kulkarni, M. S. (2011). Warranty logistics issues in auto engine industry. Paper presented at the 2011 IEEE International Conference on Quality and Reliability, ICQR 2011, 135-139.
  • Arora, N., Jain, V., Chawla, A., & Mathur, V.P. (2011). Effect of addition of Saphire (Aluminum Oxide) or Silver Fibres on the Flexural Strength, Thermal Diffusivity and Water Sorbion of heat polymerized acrylic resins, International Journal of Prosthodontics and Restorative Dentistry, 1(1), 21-27.
  • Bansal, P., Jain, S., & Moon, C. (2011). Performance comparison of an adiabatic and an internally cooled structured packed-bed dehumidifier. Applied Thermal Engineering, 31(1), 14-19.
  • Bera, T. C., Desai, K. A., & Rao, P. V. M. (2011). Error compensation in flexible end milling of tubular geometries. Journal of Materials Processing Technology, 211(1), 24-34
  • Bhore S. P., & Darpe A. K., (2011), Investigations of characteristics of micro/meso scale gas foil journal bearing (MMGFB) using first order slip velocity boundary condition and effective viscosity model, Proceedings of the National Symposium on Rotordynamics (NSRD-2011), December 19-21, Chennai, India, 151-160.
  • Chander, S., & Ray, A. (2011). Experimental and numerical study on the occurrence of off-stagnation peak in heat flux for laminar methane/air flame impinging on a flat surface. International Journal of Heat and Mass Transfer, 54(5-6), 1179-1186.  
  • Chandra, R., Vijay, V. K., Subbarao, P. M. V., & Khura, T. K. (2011). Performance evaluation of a constant speed IC engine on CNG, methane enriched biogas and biogas. Applied Energy, 88(11), 3969-3977.  
  • Chawla, A., Mukherjee, S., Marathe, R., & Malhotra, R. (2011). Repositioning methodology for FE-HBM pelvis flesh to account for upper extremity posture change. SAE Technical Papers, 
  • Chawla, A., Mukherjee, S., Marathe, R., & Malhotra, R. (2011). Repositioning methodology for FE-HBM pelvis flesh to account for upper extremity posture change. Paper presented at the SAE 2011 World Congress and Exhibition,   
  • Das, A. S., Dutt, J. K., & Ray, K. (2011). Active control of coupled flexural-torsional vibration in a flexible rotor-bearing system using electromagnetic actuator. International Journal of Non-Linear Mechanics, 46(9), 1093-1109.  
  • Dutt, J. K., & Roy, H. (2011). Viscoelastic modelling of rotor-shaft systems using an operator-based approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,225(1), 73-87.  
  • Dwivedi, M., Alam, S., Bhatnagar, N., & Ghosh, A. K. (2011). Radar transparent glass fabric reinforced polyetherimide/Cloisite 30B nanocomposites. Polymers for Advanced Technologies, 22(12), 2166-2172.  
  • Fauchoux, M., Simonson, C., Torvi, D., & Talukdar, P. (2011). CFD modelling with buoyancy effects for a heat and moisture transfer ceiling panel. Paper presented at the ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011,   
  • Gajanan, P., & Vipul, J. (2011). Multi-dimensional analysis of utilities in pricing game. Paper presented at the Proceedings of 2011 IEEE International Conference on Service Operations, Logistics and Informatics, SOLI 2011, 359-363.  
  • Gupta, A., Bhardwaj, A., & Kanda, A. (2011). Theory of constraints- lessons for academicians and practicing managers from "the goal - II". World Academy of Science, Engineering and Technology, 75, 134-138.  
  • Gupta, A., & Kumar, R. (2011). Two-dimensional lattice boltzmann model for droplet impingement and breakup in low density ratio liquids. Communications in Computational Physics, 10(3), 767-784.
  • Dev, R., Gupta, K., & Singh, S. P. (2011). Stress and dynamic analysis of rotating composite disc, Proc. of International Conference on Vibration Problems (ICoVP-2011), Prague, Czech Republic.
  • Gupta, T.C., Gupta, K., & Sehgal, D. K. (2011). Instability and chaos of a flexible rotor ball bearing system: an investigation on the influence of rotating imbalance and bearing clearance. ASME Journal of Engineering for Gas Turbines and Power, 133.
  • Gupta, V., Sharma, M., Thakur, N., & Singh, S. P. (2011). Active vibration control of a smart plate using a piezoelectric sensor-actuator pair at elevated temperatures. Smart Materials and Structures, 20(10)  
  • Gupta, V., Thakur, N., Sharma, M., & Singh, S. P. (2011). Active structural vibration control at elevated temperatures. Paper presented at the 18th International Congress on Sound and Vibration 2011, ICSV 2011, , 1227-234.  
  • Jain, S., Dhar, P.L. and Kaushik, S.C. (2011), experimental studies on the dehumidifier and regenerator of a liquid desiccant cooling system (applied thermal engineering (2000) 20 (253-267)).Applied Thermal Engineering, 31(1), 136.  
  • Jain, S., Tripathi, S., & Das, R. S. (2011). Experimental performance of a liquid desiccant dehumidification system under tropical climates. Energy Conversion and Management, 52(6), 2461-2466.
  • Khandelwal, A., Talukdar, P., & Jain, S. (2011). Energy savings in a building using regenerative evaporative cooling. Energy and Buildings, 43(2-3), 581-591.  
  • Kishore, R. A., Tiwari, R., Rakesh, P. K., Singh, I., & Bhatnagar, N. (2011). Investigation of drilling in fibre-reinforced plastics using response surface methodologyg. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225(3), 453-457.  
  • Kumar Singh, A., Jha, S., & Pandey, P. M. (2011). Design and development of nanofinishing process for 3D surfaces using ball end MR finishing tool. International Journal of Machine Tools and Manufacture, 51(2), 142-151.  
  • Kumar, P., Chandra, R., & Singh, S.P. (2011). Measurement of damping of fiber reinforced composite material. Journal of Materials Science and Engineering B1(5), 555-564.
  • Kumari, P., Tiwari, A., Prabaharan, M., & Li, S. (2011). Smart polymeric materials emerging for biological applications   
  • Kundra, T. K. (2011). A dynamic design model for teaching. Paper presented at the Conference Proceedings of the Society for Experimental Mechanics Series, , 6 689-695.  
  • Mandal, A., Singh, S. P., & Prasad, R. (2011). Fiber pull-out strength of single-walled carbon nanotube reinforced polypropylene (PP) composite using molecular dynamics simulation. Paper presented at the ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, , 3 737-744.  
  • Marathe, R. S., Chawla, A., Mukherjee, S., & Malhotra, R. (2011). Predicting thoracic spinal postures in finite element model with bezier technique. Paper presented at the 2011 IRCOBI Conference Proceedings - International Research Council on the Biomechanics of Injury, 224-227.  
  • Mathur, A., Vikas, D. H., & Kale, S. R. (2011). An experimental study on burning of vertical cloth panels. Paper presented at the Fire Safety Science, 485-498.  
  • Modak, S. V. (2011). Influence of a harmonic in the response on randomdec signature. Mechanical Systems and Signal Processing, 25(7), 2673-2682.  
  • Mulik, R. S., & Pandey, P. M. (2011). Experimental investigations and optimization of ultrasonic assisted magnetic abrasive finishing process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225(8), 1347-1362.  
  • Mulik, R. S., & Pandey, P. M. (2011). Magnetic abrasive finishing of hardened AISI 52100 steel. International Journal of Advanced Manufacturing Technology, 55(5-8), 501-515.  
  • Mulik, R. S., & Pandey, P. M. (2011). Ultrasonic assisted magnetic abrasive finishing of hardened AISI 52100 steel using unbonded SiC abrasives. International Journal of Refractory Metals and Hard Materials, 29(1), 68-77.  
  • Muzakkir, S. M., Hirani, H., Thakre, G. D., & Tyagi, M. R. (2011). Tribological failure analysis of journal bearings used in sugar mills. Engineering Failure Analysis, 18(8), 2093-2103.  
  • Nair, R. S., Singh, T., Ramkumar, J., & Jha, S. (2011). Development and experimental investigation of MAF setup for finishing of ultra high speed shafts. International Journal of Abrasive Technology, 4(4), 325-345.  
  • Nauhria, Y., Pandey, S., & Kulkani, M. S. (2011). Competitive priorities for indian car manufacturing industry (2011-2020) for global competitiveness. Global Journal of Flexible Systems Management, 12(3-4), 9-20.  
  • Odelius, K., Höglund, A., Kumar, S., Hakkarainen, M., Ghosh, A. K., Bhatnagar, N., & Albertsson, A. -. (2011). Porosity and pore size regulate the degradation product profile of polylactide. Biomacromolecules, 12(4), 1250-1258.  
  • Pagalthivarthi, K. V., Gupta, P. K., Tyagi, V., & Ravi, M. R. (2011). CFD predictions of dense slurry flow in centrifugal pump casings. World Academy of Science, Engineering and Technology, 75, 16-28.
  • Pandey, D., Kulkarni, M. S., & Vrat, P. (2011). A methodology for joint optimization for maintenance planning, process quality and production scheduling. Computers and Industrial Engineering, 61(4), 1098-1106.  
  • Panneerselvam, K., Aravindan, S., & Noorul Haq, A. (2011). Advanced welding of composite material. Paper presented at the Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011, 1067-1071.  
  • Panneerselvam, K., Aravindan, S., & Noorul Haq, A. (2011). Optimization of end milling parameters for glass fiber reinforced plastic (GFRP) using grey relational analysis. Paper presented at the Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011, 1104-1107.  
  • Patel, K. M., Pandey, P. M., & Rao, P. V. (2011). Study on machinabilty of al 2 O 3 ceramic composite in EDM using response surface methodology. Journal of Engineering Materials and Technology, Transactions of the ASME, 133(2)  
  • Patel, T. H., Zuo, M. J., & Darpe, A. K. (2011). Vibration response of coupled rotor systems with crack and misalignment. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225(3), 700-713.  
  • Patel, T. H., & Darpe, A. K. (2011), Application of full spectrum analysis for rotor fault diagnosis, IUTAM Book Series, 1011, 535-545.
  • Pradhan, R. C., Mishra, S., Naik, S. N., Bhatnagar, N., & Vijay, V. K. (2011). Oil expression from jatropha seeds using a screw press expeller. Biosystems Engineering, 109(2), 158-166.  
  • Premachandran, B., & Balaji, C. (2011). Conjugate mixed convection with surface radiation from a vertical channel with protruding heat sources. Numerical Heat Transfer; Part A: Applications, 60(2), 171-196.  
  • Rajkumar, K., & Aravindan, S. (2011). Tribological performance of microwave sintered copperTiCgraphite hybrid composites. Tribology International, 44(4), 347-358.  
  • Rajkumar, K., & Aravindan, S. (2011). Tribological studies on microwave sintered copper-carbon nanotube composites. Wear, 270(9-10), 613-621.  
  • Rajkumar, K., Kundu, K., Aravindan, S., & Kulkarni, M. S. (2011). Accelerated wear testing for evaluating the life characteristics of copper-graphite tribological composite. Materials and Design, 32(5), 3029-3035.  
  • Ratna Kishore, V., Ravi, M. R., & Ray, A. (2011). Adiabatic burning velocity and cellular flame characteristics of H 2-CO-CO 2-air mixtures. Combustion and Flame, 158(11), 2149-2164.  
  • Rawal, B. R., Ribeiro, R., Malhotra, R., & Bhatnagar, N. (2011). Design and manufacture of short stemless femoral hip implant based on CT images. Journal of Medical Sciences, 11(8), 296-301.
  • Rizvi, S. J. A., & Bhatnagar, N. (2011). Microcellular PP vs. microcellular PP/MMT nanocomposites: A comparative study of their mechanical behavior. International Polymer Processing, 26(4), 375-382.
  • Samvedi, A., & Jain, V. (2011). Studying the impact of various inventory policies on a supply chain with intermittent supply disruptions. Paper presented at the Proceedings - Winter Simulation Conference, 1636-1644.  
  • Shakya P., Darpe A. K., Urmise B., Kulkarni M. S., & Anand A. (2011) Comparative Assessment of Vibration Based Parameters for Identification of Damage in Rolling Element Bearing, Proceedings of the National Symposium on Rotor Dynamics (NSRD-2011), Chennai, December 19-21,2011, 284-301.
  • Sharma, A., Yadava, G. S., & Deshmukh, S. G. (2011). A literature review and future perspectives on maintenance optimization. Journal of Quality in Maintenance Engineering, 17(1), 5-25.
  • Sharma, V., Das, L., Pradhan, R. C., Naik, S. N., Bhatnagar, N., & Kureel, R. S. (2011). Physical properties of tung seed: An industrial oil yielding crop. Industrial Crops and Products, 33(2), 440-444.
  • Singh, V., Ghosh, S., & Rao, P. V. (2011). Comparative study of specific plowing energy for mild steel and composite ceramics using single grit scratch tests. Materials and Manufacturing Processes, 26(2), 272-281.  
  • Singh, V., Patnaik Durgumahanti, U. S., Venkateswara Rao, P., & Ghosh, S. (2011). Specific ploughing energy model using single grit scratch test. International Journal of Abrasive Technology, 4(2), 156-173.  
  • Soni, A., Chawla, A., Mukherjee, S., & Malhotra, R. (2011). Effect of impactor mass on the response of knee joint during finite element simulations. International Journal of Vehicle Safety, 5(2), 189-195.
  • Soni, A., Chawla, A., Mukherjee, S., & Malhotra, R. (2011). Effect of muscle contraction in high-speed car-pedestrian impact: Simulations for walking posture. International Journal of Vehicle Safety, 5(2), 101-116.  
  • Soni, U., & Jain, V. (2011). Minimizing the vulnerabilities of supply chain: A new framework for enhancing the resilience. Paper presented at the IEEE International Conference on Industrial Engineering and Engineering Management, 933-939.  
  • Suhaib, M., Khan, R. A., & Mukherjee, S. (2011). Contact force optimization for stable grasp of multifingire robotic grippers. Paper presented at the Proceedings of the World Congress on Engineering 2011, WCE 2011, , 3 2194-2197.  
  • Talukdar, P. (2011). Mixed convection and non-gray radiation in a horizontal rectangular duct. Numerical Heat Transfer; Part A: Applications, 59(3), 185-208.  
  • Thakkar, J., Kanda, A., & Deshmukh, S. G. (2011). Mapping of supply chain learning: A framework for SMEs. Learning Organization, 18(4), 313-332.