Publication Details

  • Agarwal, A., Shah, S. V., Bandyopadhyay, S., & Saha, S. K. (2013). Dynamics of serial kinematic chains with large number of degrees-of-freedom. Multibody System Dynamics, , 1-26.  
  • Alaei, M. H., Mahajan, P., Brieu, M., Kondo, D., Rizvi, S. J. A., Kumar, S., & Bhatnagar, N. (2013). Effect of particle size on thermomechanical properties of particulate polymer composite. Iranian Polymer Journal (English Edition), 22(11), 853-863.  
  • Ambad, P. M., & Kulkarni, M. S. (2013). A methodology for design for warranty with focus on reliability and warranty policies. Journal of Advances in Management Research, 10(1), 139-155.
  • Arora, N., Gupta, A., Sanghi, S., Aono, H., & Shyy, W. (2013). A lattice boltzmann framework for analysis of 'clap and fling' motion of finite thickness membranes. Paper presented at the 31st AIAA Applied Aerodynamics Conference, San Diego, CA, USA.
  • Asjad, M., Kulkarni, M.S. & Gandhi O.P. (2013). A Life Cycle Cost based approach of O&M support for mechanical systems. International Journal of System Assurance Engineering and Management, 4(2), 159-172.
  • Asjad, M., Mohite, S., Kulkarni, M. S., & Gandhi, O. P. (2013). Opportunistic actions for subassemblies of a reciprocating compressor: An LCC based approach. International Journal of Performability Engineering, 9(3), 273-285.  
  • Asjad, M., Kulkarni, M.S. & Gandhi, O.P. (2013). Supportability Prespectives: Current Practices and Potential Area for Future Research. Accepted for publication in International Journal of Industrial and System Engineering.
  • Bhore, S. P., & Darpe, A. K. (2013). Investigations on characteristics of micro/meso scale gas foil journal bearings for 100-200 W class micro power systems using first order slip velocity boundary conditions and the effective viscosity model. Microsystem Technologies, 19(4), 509-523.  
  • Bhore, S. P., & Darpe, A. K. (2013). Nonlinear dynamics of flexible rotor supported on the gas foil journal bearings. Journal of Sound and Vibration, 332(20), 5135-5150.  
  • Bolia, N., & Rai, R. N. (2013). Reliability based methodologies for optimal maintenance policies in military aviation. International Journal of Performability Engineering, 9(3), 295-303.  
  • Chawla, A., Mukherjee, S., Hassan, A.H., Grover, V. & Ng, E. (2013). Car Accident Reconstruction and Head Injury Correlation. Institute of Engineers Journal of India, Series C: 94 (2) 113-121.
  • Chittawadigi, R. G., & Saha, S. K. (2013). An analytical method to detect collision between cylinders using dual number algebra. Paper presented at the IEEE International Conference on Intelligent Robots and Systems, 5353-5358.
  • Chouksey, M., Dutt, J. K., & Modak, S. V. (2013). Model updating of rotors supported on journal bearings. Mechanism and Machine Theory, 71, 52-63.
  • Chouksey, M., Dutt, J. K., & Modak, S. V. (2013). Model updating of rotors supported on ball bearings and its application in response prediction and balancing. Measurement, 46(10), 4261-4273.
  • Chouksey, M., Dutt, J. K., & Modak, S. V. (2013). Updating Bearing Stiffness and Damping Coefficients of a Rotor System. Journal of the Institution of Engineers (India), (Accepted for publication)
  • Das, R. S., & Jain, S. (2013). Experimental performance of indirect air-liquid membrane contactors for liquid desiccant cooling systems. Energy, 57, 319-325.  
  • Datta, S., & Choudhary, J. N. (2013). Effect of hydrodynamic slippage on electro-osmotic flow in zeta potential patterned nanochannels. Fluid Dynamics Research, 45(5)  
  • Dhandole, S. D., & Modak, S. V. (2013). Effectiveness of updated vibro-acoustic models for analysis of interior noise in cavities. Advances in Vibration Engineering, 12(4), 369-376.  
  • Du, W., Xue, N., Gupta, A., Sastry, A.M., Martins, J.R.R.A. & Shyy, W. (2013). Optimization of LiMn2O4 electrode properties in a gradient- and surrogate-based framework. Acta Mechanica Sinica, 29(3), 335-347.
  • Gandhi, A., Asija, N., Gaur, K.K., Rizvi, S. J. A., Tiwari, V., & Bhatnagar, N. (2013). Ultrasound assisted cyclic solid-state foaming for fabricating ultra-low density porous acrylonitrile–butadiene–styrene foams. Materials Letters, 94, 76-78.
  • Goswami, J., Bhatnagar, N., Mohanty, S., & Ghosh, A. K. (2013). Processing and characterization of poly(lactic acid) based bioactive composites for biomedical scaffold application. Express Polymer Letters, 7(9), 767-777.  
  • Gupta, D., Srivastava, A., & Kale, S. (2013). Thermal properties of single and double layer fabric assemblies. Indian Journal of Fibre and Textile Research, 38(4), 387-394.  
  • Gupta, M., Pasi, A., Ray, A., & Kale, S. R. (2013). An experimental study of the effects of water mist characteristics on pool fire suppression. Experimental Thermal and Fluid Science, 44, 768-778.
  • Gupta, T. C., & Gupta, K. (2013). Correlation between different parameters of a horizontal flexible rotor ball bearing system for instability and chaos. ASME Turbo Expo 2013, Texas, USA, Paper No. GT2013-95308.
  • Jain, V., Kundu, A., Chan, F. T. S., & Patel, M. (2013). A chaotic bee colony approach for supplier selection-order allocation with different discounting policies in a coopetitive multi-echelon supply chain. Journal of Intelligent Manufacturing, , 1-14.  
  • Kala, P., Kumar, S., & Pandey, P. M. (2013). Polishing of copper alloy using double disk ultrasonic assisted magnetic abrasive polishing. Materials and Manufacturing Processes, 28(2), 200-206.
  • Khas, K. S., Pandey, P. M., & Ray, A. R. (2013). Rapid manufacturing of a clubfoot model imitating soft tissue and bones: This paper reports an exploration of fabricating a composite clubfoot model consisting of both soft and hard tissues for biomechanical assessment of infant clubfoot. Virtual and Physical Prototyping, 8(3), 187-192.  
  • Koul, M., Shah, S. V., Saha, S. K., & Manivannan, M. (2013). Reduced-order forward dynamics of multiclosed-loop systems. Multibody System Dynamics, , 1-26.  
  • Kumar, G., Jain, V., & Gandhi, O. P. (2013). Feasibility of analytical solution for transient availability using semi-markov process. International Journal of Reliability and Safety, 7(4), 388-410.
  • Kumar, V., Singhal, G., & Subbarao, P. M. V. (2013). Study of supersonic flow in a constant rate of momentum change (CRMC) ejector with frictional effects. Applied Thermal Engineering, 60(1-2), 61-71.
  • Lad, B. K., & Kulkarn, M. S. (2013). Reliability and maintenance based design of machine tools. International Journal of Performability Engineering, 9(3), 321-332.  
  • Manikandan, G., Uthayakumar, M., & Aravindan, S. (2013). Machining and simulation studies of bimetallic pistons. International Journal of Advanced Manufacturing Technology, 66(5-8), 711-720.
  • Meshram, S. D., Madhusudhan Reddy, G., & Pandey, S. (2013). Friction stir welding of maraging steel (grade-250). Materials and Design, 49, 58-64.  
  • Modak, S. V. (2013). Separation of structural modes and harmonic frequencies in operational modal analysis using random decrement. Mechanical Systems and Signal Processing, 41(1-2), 366-379.
  • Modi, B., & Kumar, D. R. (2013). Development of a hydroforming setup for deep drawing of square cups with variable blank holding force technique. International Journal of Advanced Manufacturing Technology, 66(5-8), 1159-1169.  
  • Mohan, V. P. C., & Talukdar, P. (2013). Design of an experimental set up for convective drying: Experimental studies at different drying temperature. Heat and Mass Transfer/Waerme- Und Stoffuebertragung, 49(1), 31-40.  
  • Muzakkir, S. M., Hirani, H., & Thakre, G. D. (2013). Lubricant for heavily loaded slow-speed journal bearing. Tribology Transactions, 56(6), 1060-1068.  
  • Narayanan, P., Mayank Tiwari, & Kshitij Gupta, (3013). Non-Linear dynamics, instability and chaos of two spool aero gas turbine rotor system, ASME Gas Turbine India (GTINDIA) Conference, Bangalore, India, Paper No. GTINDIA 2013-3582.
  • Nehete, D. V., Modak, S. V., & Gupta, K. (2013). A method for fe model updating of coupled vibro-acoustic systems using constrained optimization. Proc. of the ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE2013, San Diego, USA, Paper No. IMCE2013 – 66843.
  • Om, H., & Pandey, S. (2013). Effect of heat input on dilution and heat affected zone in submerged arc welding process. Sadhana - Academy Proceedings in Engineering Sciences, , 1-23.  
  • Parwani, A. K., Talukdar, P., & Subbarao, P. M. V. (2013). Performance evaluation of hybrid differential evolution approach for estimation of the strength of a heat source in a radiatively participating medium.International Journal of Heat and Mass Transfer, 56(1-2), 552-560.  
  • Parwani, A. K., Talukdar, P., & Subbarao, P. M. V. (2013). Simultaneous estimation of strength and position of a heat source in a participating medium using DE algorithm. Journal of Quantitative Spectroscopy and Radiative Transfer, 127, 130-139.  
  • Patel, V. N., Tandon, N., & Pandey, R. K. (2013). Vibration studies of dynamically loaded deep groove ball bearings in presence of local defects on races. Paper presented at the Procedia Engineering, , 64 1582-1591.  
  • Ponappa, K., Aravindan, S., & Rao, P. V. (2013). Influence of Y2O3 particles on mechanical properties of magnesium and magnesium alloy (AZ91D). Journal of Composite Materials, 47(10), 1231-1239.
  • Rajkumar, K., & Aravindan, S. (2013). Tribological behavior of microwave processed copper-nanographite composites. Tribology International, 57, 282-296.  
  • Rajput, M. S., Pandey, P. M., & Jha, S. (2013). Micromanufacturing by selective jet electrodeposition process. International Journal of Advanced Manufacturing Technology, , 1-7.  
  • Rawal, B. R., & Bhatnagar, N. (2013). An investigation on the effect of groove geometry on cementless femoral stem component in hip arthroplasty. Pakistan Journal of Biological Sciences, 16(24), 2073-2075.  
  • Roy, H., Dutt, J. K., & Datta, P. K. (2013). Dynamic behavior of stepped multilayered viscoelastic beams - a finite element approach. Advances in Vibration Engineering, 12(1), 75-88.  
  • Samvedi, A., & Jain, V. (2013). A grey approach for forecasting in a supply chain during intermittentdisruptions. Engineering Applications of Artificial Intelligence, 26(3), 1044-1051.  
  • Samvedi, A., & Jain, V. (2013). A study on the interactions between supply chain risk management criteria using fuzzy DEMATEL method. International Journal of Operational Research, 18(3), 255-271.
  • Samvedi, A., Jain, V., & Chan, F. T. S. (2013). Quantifying risks in a supply chain through integration of fuzzy AHP and fuzzy TOPSIS. International Journal of Production Research, 51(8), 2433-2442.
  • Sarkar, C., & Hirani, H. (2013). Synthesis and characterization of antifriction magnetorheological fluids for brake. Defence Science Journal, 63(4), 408-412.
  • Sarkar, C., & Hirani, H. (2013). Theoretical and experimental studies on a magnetorheological brake operating under compression plus shear mode. Smart Materials and Structures, 22(11)
  • Sarkar, C., & Hirani, H. (2013). Design of a squeeze film magnetorheological brake considering compression enhanced shear yield stress of magnetorheological fluid. Journal of Physics: Conference Series, 412(1)  
  • Satyarthi, M. K., & Pandey, P. M. (2013). Comparison of EDG, diamond grinding, and EDM processing of conductive alumina ceramic composite. Materials and Manufacturing Processes, 28(4), 369-374.
  • Satyarthi, M. K., & Pandey, P. M. (2013). Modeling of material removal rate in electric discharge grinding process. International Journal of Machine Tools and Manufacture, 74, 65-73.  
  • Shah, S. V., & Saha, S. K. (2013). Correlation between diagonal ratio and condition number of the generalized inertia matrix of a serial-chain. Archive of Mechanical Engineering, 60(1), 147-156.
  • Shah, S. V., Saha, S. K., & Dutt, J. K. (2013). Dynamics algorithms for multibody systems. Advances in Vibration Engineering, 12(3), 227-239.  
  • Shakya P., Darpe, A. K., & Kulkarni, M. S. (2013) Vibration-based fault diagnosis in rolling element bearings: ranking of various time, frequency and time-frequency domain data-based damage identification parameters, International Journal of Condition Monitoring, 3(2), 1-10.
  • Singh, A. K., Jha, S., & Pandey, P. M. (2013). Mechanism of material removal in ball end magnetorheological finishing process. Wear, 302(1-2), 1180-1191.  
  • Singh, A. K., Jha, S., & Pandey, P. M. (2013). Rheological behavior of mr polishing fluid in ball end magnetorheological finishing process. Magnetohydrodynamics, 49(3-4), 512-515.  
  • Singh, D., Premachandran, B., & Kohli, S. (2013). Experimental and numerical investigation of jet impingement cooling of a circular cylinder. International Journal of Heat and Mass Transfer, 60(1), 672-688.  
  • Singh, D., Premachandran, B., & Kohli, S. (2013). Numerical simulation of the jet impingement cooling of a circular cylinder. Numerical Heat Transfer; Part A: Applications, 64(2), 153-185.
  • Singh, J. P., & Pandey, P. M. (2013). Fitment study of porous polyamide scaffolds fabricated from selective laser sintering. Paper presented at the Procedia Engineering, , 59 59-71.  
  • Singh, V. K., & Talukdar, P. (2013). Comparisons of different heat transfer models of a walking beam type reheat furnace. International Communications in Heat and Mass Transfer, 47, 20-26.
  • Srivastava, V., & Pandey, P. M. (2013). Experimental investigation on electrical discharge machining process with ultrasonic-assisted cryogenically cooled electrode. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(2), 301-314.  
  • Srivastava, V., & Pandey, P. M. (2013). Study of ultrasonic assisted cryogenically cooled EDM process using sintered (cu-TiC) tooltip. Journal of Manufacturing Processes, 15(1), 127-135.
  • Subramanian, K. A., Mathad, V. C., Vijay, V. K., & Subbarao, P. M. V. (2013). Comparative evaluation of emission and fuel economy of an automotive spark ignition vehicle fuelled with methane enriched biogas and CNG using chassis dynamometer. Applied Energy, 105, 17-29.  
  • Sudeep, U., Pandey, R. K., & Tandon, N. (2013). Effects of surface texturing on friction and vibration behaviors of sliding lubricated concentrated point contacts under linear reciprocating motion. Tribology International, 62, 198-207.  
  • Talukdar, P., Mendes, M. A. A., Parida, R. K., Trimis, D., & Ray, S. (2013). Modelling of conduction-radiation in a porous medium with blocked-off region approach. International Journal of Thermal Sciences, 72, 102-114.  
  • Tambe, P. P., & Kulkarni, M. S. (2013). An opportunistic maintenance decision of a multi-component system considering the effect of failures on quality. Paper presented at the Lecture Notes in Engineering and Computer Science, , 1 LNECS 693-698.  
  • Tambe, P. P., Mohite, S., & Kulkarni, M. S. (2013). Optimisation of opportunistic maintenance of a multi-component system considering the effect of failures on quality and production schedule: A case study. International Journal of Advanced Manufacturing Technology, 69(5-8), 1743-1756.  
  • Tambe, P.P. & Kulkarni, M.S. (2013). A novel approach for production scheduling of a high pressure die casting machine subjected to selective maintenance and a sampling procedure for quality control. Accepted for publication in International Journal of System Assurance Engineering and Management.
  • Teja, C. K., Chawla, A., & Mukherjee, S. (2013). Determining the strain rate dependence of cortical and cancellous bones of human tibia using a split hopkinson pressure bar. International Journal of Crashworthiness,18(1), 11-18.  
  • Thakkar, J., Kanda, A., & Deshmukh, S. G. (2013). Supply chain issues in SMEs: Select insights from cases of indian origin. Production Planning and Control, 24(1), 47-71.  
  • Tomar, P., Pandey, R. K., & Nath, Y. (2013). An accurate analysis for computation of thermal minimum film thickness in inlet zone in hydrostatic extrusion process. Tribology Online, 8(2), 171-178.
  • Tomar, P., Pandey, R. K., & Nath, Y. (2013). Numerical modeling of frictional stress in the contact zone of direct extrusion of aluminum alloys under starved lubrication. JOM, 65(11), 1426-1432.
  • Tornar, P., Pandey, R. K., & Nath, Y. (2013). Numerical simulation of friction stress in wire drawing produced by direct extrusion process in presence of lubricant starvation. Paper presented at the Procedia Engineering, , 64 1320-1328.
  • Uthayakumar, M., Aravindan, S., & Rajkumar, K. (2013). Wear performance of al-SiC-B4C hybrid composites under dry sliding conditions. Materials and Design, 47, 456-464.  
  • Uthayakumar, M., Kumaran, S. T., & Aravindan, S. (2013). Dry sliding friction and wear studies of fly ash reinforced AA-6351 metal matrix composites. Advances in Tribology,   
  • Vashistha, V., & Talukdar, P. (2013). Numerical studies for performance evaluation of a permeable ceiling panel for regulation of indoor humidity. Energy and Buildings, 62, 158-165.  
  • Xue, N., Du, W., Gupta, A., Shyy, W., Sastry, A.M. & Martins, J.R.R.A. (2013). Optimization of a single Lithium-ion battery cell with a gradient-based algorithm. Journal of the Electrochemical Society, 160(8), A1071-A1078.