Publication Details

  • Ajith, P. M., Sathiya, P., & Aravindan, S. (2014). Experimental Investigation on Friction Welding of UNS S32205 Duplex Stainless Steel. Acta Metallurgica Sinica. 27, 995-1007.
  • Arora, N., Gupta, A., Sanghi, S., Aono, H., & Shyy, W. (2014). Lift-drag and flow structures associated with the clap and fling motion Lift-drag and flow structures associated with the clap and fling motion, 26, 071906.
  • Asjad, M., Kulkarni, M. S., & Gandhi, O. P. (2014). A conceptual framework for capturing supportability attributes of a mechanical system.International Journal of Services and Operations Management,17, 107-118.
  • Asjad, M., Kulkarni, M. S. & Gandhi, O.P. (2014). Optimal support strategy for mechanical systems under contract realm. Accepted for publication in Benchmarking: An international Journal, 22.
  • Ateeque, M., Mishra, R. K., Chandramohan, V. P., & Talukdar, P. (2014). Numerical modeling of convective drying of food with spatially dependent transfer coefficient in a turbulent flow field.International Journal of Thermal Sciences,78, 145-157.
  • Babu, C. K., Tandon, N., & Pandey, R. K. (2014). Vibration Modeling of a Rigid Rotor Supported on the Lubricated Angular Contact Ball Bearings Considering Six Degrees of Freedom and Waviness on Balls and Races. Journal of Vibration and Acoustics, 136, 044503-1.
  • Bhavsar, S. N., Aravindan, S., & Rao, P. V. (2014). Investigating material removal rate and surface roughness using multi-objective optimization for focused ion beam (FIB) micro-milling of cemented carbide. Precision Engineering, 40, 131-138.
  • Bhore, S. P. & Darpe, A. K. (2014). Rotordynamics of micro and mesoscopic turbomachinery ?a review. Advances in Vibration Engineering and Technologies, 2, 1-9.
  • Chak, S. K., & Rao, P. V. (2014). Machining of SiC by ECDM process using different electrode configurations under the effect of pulsed DC, 28, 39-56.
  • Chandramohan, V. P., & Talukdar, P. (2014). Experimental Studies for Convective Drying of Potato. Heat Transfer Engineering, 35, 1288-1297.
  • Chouksey, M., Dutt, J. K., & Modak, S. V. (2014). Modal analysis of a flexible internally damped rotor shaft system with bearing anisotropy. Journal of vibration engineering & technologies, 2, 19-25
  • Datla, N. V., Konh, B., Honarvar, M., Podder, T. K., Dicker, A. P., Yu, Y., & Hutapea, P. (2014). A model to predict deflection of bevel-tipped active needle advancing in soft tissue. Medical Engineering and Physics, 36, 285-293.
  • Datla, N. V., Konh, B., Koo, J. J. Y., Choi, D. J. W., Yu, Y., Dicker, A. P. Hutapea, P. (2014). Polyacrylamide phantom for self-actuating needle-tissue interaction studies. Medical Engineering and Physics, 36, 140-145.
  • Gandhi, A., Asija, N., Chauhan, H., & Bhatnagar, N. (2014). Ultrasound-induced nucleation in microcellular polymers. Journal of Applied Polymer Science, 131(18), 9076-9080.
  • Goyal, A., Chaudhry, S., & Subbarao, P. M. V. (2014). Direct three dimensional tomography of flames using maximization of entropy technique.Combustion and Flame,161, 173-183.
  • Gupta, A., Matharoo, H. S., Makkar, D., & Kumar, R. (2014). Droplet formation via squeezing mechanism in a microfluidic flow-focusing device. Computers and Fluids, 100, 218-226.
  • Gubran, H. B. H., & Gupta, K. (2014). Design optimization of automotive propeller shafts. Advances in Vibration Engineering, 13.
  • Hariharan, K., Barlat, F., Lee, M. G., & Prakash, R. V. (2014). Extension of strain-life equation for low-cycle fatigue of sheet metals using anisotropic yield criteria and distortional hardening model. Fatigue & Fracture of Engineering Materials & Structures, 37, 977-991.
  • Hariharan, K., Chakraborti, N., Barlat, F., & Lee, M. G. (2014). A Novel Multi-objective Genetic Algorithms-Based Calculation of Hill?s Coefficients. Metallurgical and Materials Transactions A, 45, 2704-2707.
  • Hariharan, K., Nguyen, N.-T., Barlat, F., Lee, M.-G., & Kim, J. H. (2014). A pragmatic approach to accommodate in-plane anisotropy in forming limit diagrams. Mechanics Research Communications, 62, 5-17.
  • Honarvar, M., Datla, N. V., Konh, B., Podder, T. K., Dicker, A. P., Yu, Y., & Hutapea, P. (2014). Study of Unrecovered Strain and Critical Stresses in One-Way Shape Memory Nitinol. Journal of Materials Engineering and Performance, 23, 2885-2893.
  • Jeyaraj, K. L., Muralidharan, C., Senthilvelan, T., & Deshmukh, S. G. (2014). Customer Needs and Customer Satisfaction Analysis in a Textile Dyeing Process: A Case Study. Clothing and Textiles Research Journal, 32, 282-295.
  • Kango, S., Sharma, R. K., & Pandey, R. K. (2014). Thermal analysis of microtextured journal bearing using non-newtonian rheology of lubricant and JFO boundary conditions.Tribology International,69, 19-29.
  • Kango, S., Sharma, R.K., & Pandey, R.K. (2014) Comparative analysis of textured and grooved hydrodynamic journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 228, 82-95.
  • Khanam, S., Dutt, J. K. J., & Tandon, N. (2014). Extracting Rolling Element Bearing Faults From Noisy Vibration Signal Using Kalman Filter. Journal of Vibration and Acoustics, 136, 031008.
  • Khatait, J. P., Brouwer, D. M., Aarts, R. G. K. M., & Herder, J. L. (2014). Effect on combined motion on force transmission of a flexible instrument .IMECE 40076, 1-10.
  • Kumar, A., Jain, V., & Kumar, S. (2014). A comprehensive environment friendly approach for supplier selection.Omega (United Kingdom),42, 109-123.
  • Lijesh, K.P., & Hirani, H. (2014). Stiffness and damping coefficients for rubber mounted hybrid bearing, Paper accepted for publication in Lubrication Science, 26, 301-314.
  • Mendes, M. A. A, Skibina, V., Talukdar, P., Wulf, R., Gross, U., Trimis, D., & Ray, S. (2014). Experimental validation of simplified conduction-radiation models for evaluation of Effective Thermal Conductivity of open-cell metal foams at high temperatures. International Journal of Heat and Mass Transfer, 78, 112-120.
  • Mendes, M. A. A., Talukdar, P., Ray, S., & Trimis, D. (2014). Detailed and simplified models for evaluation of effective thermal conductivity of open-cell porous foams at high temperatures in presence of thermal radiation.International Journal of Heat and Mass Transfer,68, 612-624.
  • Mishra, V., Goel, H., Mulik, R. S., & Pandey, P. M. (2014). Determining work-brush interface temperature in magnetic abrasive finishing process. Journal of Manufacturing Processes, 16, 248-256.
  • Modak, S. V. (2014). Model updating using uncorrelated modes. Journal of Sound and Vibration, 333, 2297-2322.
  • Morgado, T., Coelho, P. J., & Talukdar, P. (2014). Assessment of uniform temperature assumption in zoning on the numerical simulation of a walking beam reheating furnace. Applied Thermal Engineering, 76, 496-508.
  • Muzakkir, S.M., Lijesh, K.P., & Hirani, H. (2014) Tribological failure analysis of a heavily-loaded slow speed hybrid journal bearing. Paper accepted for publication in Engineering Failure Analysis, 18, 2093-2103.
  • Muzakkir, S. M., Lijesh, K. P., Hirani, H., & Thakre, G. D. (2014). Effect of cylindricity on the tribological performance of the heavily loaded slowspeed journal bearing. Journal of Engineering Tribology, 2, 178-195.
  • Namalaa, K.K., Mahajan, P., & Bhatnagar, N. (2014). Digital Image Correlation of Low Velocity Impact on Glass/Epoxy Composite. Paper accepted for publication in International Journal for Computational Methods in Engineering Science and Mechanics, 15, 203-217.
  • Nehete, D. V., Modak, S. V., & Gupta, K. (2014). Structural FE model updating of cavity systems incorporating vibro-acoustic coupling. Mechanical Systems and Signal Processing, 50, 362-379.
  • Nguyen, N.-T., Hariharan, K., Barlat, F., & Lee, M.-G. (2014). Design of high strength differential TWB to enhance drawability: FE study and optimization. International Journal of Precision Engineering and Manufacturing, 15, 2273-2283.
  • Ningegowda, B. M., & Premachandran, B. (2014). A Coupled Level Set and Volume of Fluid method with multi-directional advection algorithms for two-phase flows with and without phase change. International Journal of Heat and Mass Transfer, 79, 532-550.
  • Pachpute, S., Premachandran, B., & Talukdar, P. A numerical study of combined forced convection and gas radiation from a circular cylinder in cross flow. Paper accepted for publication in International Journal of Heat Transfer Engineering, 36, 135-151.
  • Parwani, A. K., Talukdar, P., & Subbarao, P. M. V. (2014b). Estimation of boundary heat flux using experimental temperature data in turbulent forced convection flow. Heat and Mass Transfer, 51, 411-421.
  • Parwani, A. K., Talukdar, P., & Subbarao, P. M. V. (2014). A hybrid approach using CGM and de algorithm for estimation of boundary heat flux in a parallel plate channel.Numerical Heat Transfer; Part A: Applications,65, 461-481.
  • Patel, V. N., Tandon, N., & Pandey, R. K. (2014). Experimental Study for Vibration Behaviors of Locally Defective Deep Groove Ball Bearings under Dynamic Radial Load, Article ID 271346.
  • Prasad, L., Subbarao, P. M. V., & Subrahmanyam, J. P. (2014). Pyrolysis and gasification characteristics of pongamia residue (de-oiled cake) using thermogravimetry and downdraft gasifier.Applied Thermal Engineering,63, 379-386.
  • Purohit, A., Darpe, A. K., & Singh, S. P. (2014). A numerical investigation on effects of structural flexibility on aerodynamic far field sound.Computers and Fluids,89, 143-152.
  • Purohit, A., Darpe, A. K., & Singh, S. P. (2014b). A study on aerodynamic sound from an externally excited flexible structure in flow. Computers & Fluids, 103, 100-115.
  • Rajput, M. S., Pandey, P. M., & Jha, S. (2014a). Experimental investigations into ultrasonic-assisted jet electrodeposition process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228, 682-694.
  • Rai, R. N., & Bolia, N. (2014). Availability-based optimal maintenance policies for repairable systems in military aviation by identification of dominant failure modes.Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability,228, 52-61.
  • Rai, R. N., & Bolia, N. B. (2014). Optimal Decision Support for Air Power Potential. IEEE Transactions on Engineering Management. IEEE transactions on engineering management, 61, 310-322.
  • Rajput, M. S., Pandey, P. M., & Jha, S. (2014). Fabrication of nano-sized grain micro features using ultrasonic-assisted jet electrodeposition with pulsed current supply. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228, 1338-1349.
  • Rashid, M., & Gupta, a. (2014). Mathematical Model for Combined Effect of SEI Formation and Gas Evolution in Li-Ion Batteries. ECS Electrochemistry Letters, 3, A95-A98.
  • Rizvi, S., & Alaei, M; Yadav, A; Bhatnagar, N; (2014). Quantitative analysis of cell distribution in injection molded microcellular foam. Journal of Cellular, 50, 199-219.
  • Saha, S. K., Matsagar, V. a., & Jain, A. K. (2014). Reviewing dynamic analysis of base-isolated cylindrical liquid storage tanks under near-fault earthquakes. The IES Journal Part A: Civil & Structural Engineering, 8, 41-61.
  • Shakya, P., Kulkarni, M. S., & Darpe, A. K. (2014). Bearing diagnosis based on Mahalanobis-Taguchi-Gram-Schmidt method. Journal of Sound and Vibration, 337, 342-362.
  • Shakya, P., Kulkarni, M. S., & Darpe, A. K. (2014). A novel methodology for online detection of bearing health status for naturally progressing defect. Journal of Sound and Vibration, 333, 5614-5629.
  • Singh, S. P., Bhattacharya, S., & Sehgal, D. K. (2014). Evaluation of high temperature mechanical strength of Cr-Mo grade steel through small punch test technique. Engineering Failure Analysis, 39, 207-220.
  • Singh, K., Premachandran, B., & Ravi, M. R. (2014). A Numerical Study on the 2D Film Cooling of a Flat Surface. Numerical Heat Transfer, Part A: Applications, 67, 673-695.
  • Singh, V. K., Talukdar, P., & Coelho, P. J. (2014). Performance Evaluation of Two Heat Transfer Models of a Walking Beam Type Reheat Furnace. Heat Transfer Engineering, 36, 91-101.
  • Setti, D; Yadav, N.K; Ghosh, S. (2014). Grindability improvement of Ti-6Al-4V using cryogenic cooling, S I Mech E Part B, J. of Engineering Manufacture. 228, 1131-1137.
  • Steel, S. A. F., Rathod, D., Aravindan, S., Singh, P. K., & Pandey, S. (2014). Metallurgical Characterization and Diffusion Studies of Successively Buttered Deposit of Ni - Fe Alloy and Inconel on SA508 Ferritic Steel. SIIJ International. 54, 1866-1875.
  • Tanwar, M., Rai, R. N., & Bolia, N. B. (2014). Imperfect Repair Modeling Using Kijima Type Generalized Renewal Process. Reliability Engineering & System Safety, 124, 24-31.
  • Udayraj; Talukdar, P., Alagirusamy, R., & Das, A. (2014). Heat transfer analysis and second degree burn prediction in human skin exposed to flame and radiant heat using dual phase lag phenomenon. International Journal of Heat and Mass Transfer, 78, 1068-1079.
  • Upadhyay, A., & Bolia, N. (2014a). Combined empty and loaded train scheduling for dedicated freight railway corridors. Computers & Industrial Engineering, 76, 23-31.
  • Upadhyay, A., & Bolia, N. B. (2014b). An optimization based decision support system for integrated planning and scheduling on dedicated freight corridors. International Journal of Production Research, 52, 7416-7435.
  • Vetrivel Sezhian, M., Muralidharan, C., Nambirajan, T., & Deshmukh, S. G. (2014). Attribute-based perceptual mapping using discriminant analysis in a public sector passenger bus transport company: A case study. Journal of Advanced Transportation,48, 32-47.
  • Yoon, H. M., Kondaraju, S., & Lee, J. S. (2014). Molecular dynamics simulations of the friction experienced by graphene flakes in rotational motion.Tribology International,70, 170-178.
  • Zine, P. U., Kulkarni, M. S., Ray, A. K., & Chawla, R. (2014). Designing flexible service systems: application to machine tools. Journal of Intelligent Manufacturing, 10845-014-0947.
  • Zine, P.U., Kulkarni, M.S., Chawla, R. & Ray, A.K. (2014). A framework for value co-creation through customization and personalization in the context of machine tool PSS. Paper to be presented at 'Product Service Systems and Value Creation. The 6th CIRP Conference on Industrial Product-Service Systems to be held at University of Windsor, Ontario, Canada, 16, 32-37.
  • Prabakaran,S., Jayaraman,S., Minh, D.h., and Sinha,S.K., (2014) The role of functional end groups of perfluoropolyether (Z-dol and Z-03) lubricants in augmenting the tribology of SU-8 composites, Tribology Letters 56(3) 423-434.
  • Man,Y., Liu,B., Ng,K.K., Yu,S., Sinha,s.K., and Lim,S.C. (2014) Investigation of light contact and lube-surfing state with electrical current, IEEE Transactions on Magnetics, 50(11) 3303004.
  • Ng,E., Satyanarayana,N., Sinha,S.K., Lim, C., Zheng,Z., (2014) Tribological Performances of ZDDP and Ashless Triphenyl Phosphorothionate (TPPT) as Lubricant Additives on Ti-N and Ti-Al-N Coated Steel Surfaces, Tribology - Materials, Surfaces & Interfaces 8(4) 209-221..
  • Ng,E., Sinha,S.K., Satyanarayana,N., Lim, C., Narayan,A., (2014) Effect of ZDDP and ashless Triphenyl Phosphorothionate (TPPT) as lubricant additives on tribological performance of Cr-N coatings. Manuscript accepted by Tribology - Materials, Surfaces & Interfaces 8(3) 172-178.
  • Liu,Y., Loy,K.X.Z., Lim, C., Sinha,S.K., (2014) Pre-polishing the metal counterface of metal-UHMWPE wear pair with filler filled UHMWPE composites to generate counterface changes to have an effective reduction in pure UHMWPE wear, Tribology Letters, 53(1) 11-16.