Publication Details

  • Agrawal, A., Khichar, M. and Jain, S. (2016) Transient Simulation of Wet Cooling Strategies for a Data Center in Worldwide Climate Zones, Energy and Buildings, 127, pp. 352-359
  • Ajith, P. M., Sathiya, P. and Aravindan, S. (2016) Characterization of Microstructure, Toughness and Chemical Composition of Friction-Welded Joints of UNS S32205 Duplex Stainless Steel, Friction, 2, pp. 82-91
  • Arora, N., Gupta, A. and Shyy, W. (2016) A Shifting Discontinuous-grid-block Lattice Boltzmann Method for Moving Boundary Simulations, Computer and Fluids, 125, pp. 59-70
  • Arora, A., Subbarao, P. M. V. and Agrawal, R. S. (2016) Development of Parametric Space for the Vortex Generator Location for Improving Thermal Compactness of an Existing Inline Fin and Tube Heat Exchanger, Applied Thermal Engineering, 98, pp. 727-742
  • Bahga, S. S., Khichar, M. and Moza, R. (2016) Theory of Multi-Species Electrophoresis in the Presence of Surface Conduction, Proceedings of the Royal Society, Mathematical, Physical and Engineering Sciences, 472, 20150661
  • Bhanot, M., Rao, P. V. and Deshmukh, S. G. (2016) An Integrated Sustainability Assessment Framework: A Case of Turning Process’, Clean technologies and Environmental Policy Journal, 18, pp. 1475-1513
  • Das, P., Subbarao, P. M. V., Selokar, M. and Subrahmanyam, J. P. (2016) Effect of Injection Timing, Premixed Equivalence Ratio and EGR on Combustion Characteristics of an HCCI-DI Combustion Engine using In-cylinder Dual Injection Strategy, SAE Technical Papers, Conference Paper
  • Khanam, S., Tandon, N. and Dutt, J. K. (2016) Multi-Event Excitation Force Model for Inner Race Defect in a Rolling Element Bearing, Journal of Tribology, 138, 011106
  • Desai, K. A. and P. V. M. Rao, (2016) Machining of Curved Geometries with Constant Engagement Tool Paths, Proceedings of the Institution of Mechanical engineers Part B-Journal of Engineering and Manufacturing, 230, pp. 53-65
  • Gajbhiye, S. O. and S. P. Singh (2016) Multiscale Modeling of Dynamic Characteristics of Carbon Nanotube Reinforced Nanocomposites, Nano, 11, 1650083
  • Gandhi, A., Asija, N., Chauhan, H.,Bhatnagar, N. Erratum, (2016) Ultrasound-induced Nucleation in Microcellular Polymers, Journal of Applied Polymer Science ,133, 43079.
  • Gaur, P., Chawla, A., S. Mukherjee, Verma, K., Lalvani, S., Malhotra, R. and Mayer, C. (2016) Characterization of Human Diaphragm at High Strain Rate Loading, Journal of Mechanical Behavior of Biomedical Materials, 60, pp. 603-616
  • Goswami, A., Aravindan, S. and Rao, P. V. (2016) Fabrication of Substrate Supported Bimetallic Nanoparticles and their Optical Characterization through Reflection Spectra, Superlattices and Microstructures, 91, pp. 252-258
  • Goswami, A., Aravindan, S., Rao, P. V. and Yoshino, M. (2016) Structured Surfaces for Generation of Negative Index of Refraction, Critical Reviews in Solid state Material Science, 41, pp. 367-385
  • Hariharan, K., Dubey, P., Jain, J. (2016) Time Dependent Ductility Improvement of Stainless Steel SS 316 using Stress Relaxation, Material Science and Engineering-A, pp. 250-256
  • Jain, A. K. and Pandey, P. M. (2016) Experimental Studies on Tool Wear in μ-RUM Process, International Journal of Advanced Manufacturing Technology, pp. 1-14,
  • Jain, A. K. and Pandey, P. M. (2016) Study of Peck drilling of borosilicate glass with μrUM Process for MEMS, Journal of Manufacturing Processes, 22, pp. 134-150
  • Jha, A. K. and Bahga, S. S. (2016) Uncertainty Quantification in Modeling of Microfluidic T-sensor Based Diffusion Immunoassay, Biomicrofluidics, 10, 014105
  • Katiyar, J. K., Sinha, S. K. and Kumar, A. (2016) Effect of Graphite Concentration on the Tribological and Mechanical Properties of Filled SU-8 Polymer, Tribology online, 11, pp. 152-158
  • Kumar, A., Datta, S. and Kalyanasundaram, D. (2016) Liquid Slippage in Confined Flows: Effect of Periodic Micropatterns of Arbitrary Pitch and Amplitude, ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer 1, V001T01A004
  • Lijesh, K. P., Muzakkir, S. M., Hirani, H. and Thakre, G. D. (2016) Control on Wear of Journal Bearing Operating in Mixed Lubrication Regime using Grooving Arrangements, Industrial Lubrication and Tribology 68, pp. 458-465
  • Lijesh, K. P., Muzakkir, S. M. and Hirani, H. (2016) Influence of Surfactants on Tribological Behaviors of MWCNTs (Multi-walled Carbon Nano-tubes), Tribology- Materials Surfaces and Interfaces 10, pp. 74-81
  • Lijesh, K. P., Muzakkir, S. M. and Hirani, H. (2016) Failure Mode and Effect Analysis of Passive Magnetic Bearing, Engineering Failure Analysis, 62, pp. 1-20
  • Lijesh, K. P. and Hirani, H. (2016) Failure Mode and Effect Analysis of Active Magnetic Bearings, Tribology in Industry, 38, pp. 90-101
  • Lijesh, K. P., Muzakkir, S. M. and Hirani, H. (2016) Rheological Measurement of Redispersibility and Settling to Analyze the Effect of Surfactants on MR Particles, Tribology-Material Surface and Interfaces, 10, pp. 53-62
  • Mandal, A., Singh, S. P. and Prasad, R. (2016) Dynamic Mechanical Characterization of CNT–PP Nanocomposites, Journal of Molecular Modelling, 22, pp. 1-7
  • Mohan, D., Tiwari, S. and Mukherjee, S. (2016) Urban Traffic Safety Assessment: A Case Study of Six Indian Cities, IATSS Research, 39, pp. 95-101
  • Muthu, S., Talukdar, P. and Jain, S. (2016) Effect of Regeneration Section Angle on the Performance of a Rotary Desiccant wheel, Journal of Thermal science and Engineering Application 8, 011013
  • Nehte, D. V., Modak, S. V. and Gupta, K. (2016) Coupled Vibro-Acoustic Model Updating using Frequency Response Functions, Mechanical Systems and Processing, 70-71, pp. 308-319
  • Niranjan, M. S. and Jha, S. (2016) Statistical Analysis of Magnetorheological Ball End Finishing Parameters using Response Surface Methodology, International Journal of Manufacturing Technology and Management, 30, pp. 240-252
  • Panda, J. N., Bijwe, J. and Pandey, R. K. (2016) Role of Treatment to Graphite Particles to Increase the Thermal Conductivity in Controlling Tribo-performance of Polymer Composites, Wear, 360-361, pp. 87-96
  • Patel, V. M. and Talukdar, P. (2016) Evaluation of Radiative Properties of a Representative Foam Structure using Blocked-off Region Approach Integrated with Finite Volume Method, International Journal of Thermal Sciences, 108, pp. 89-99
  • Prabakaran, S., Sinha, S.K., Jayaraman, S. and Duong, S.H. A. Comprehensive Study on the Self-lubrication Mechanisms of SU-8 Composites, Tribology International, 95, pp. 391-405
  • Pradhan, S. and Modak, S. V. (2016) Damping Matrix Identification by Finite Element Model Updating Using Frequency Response Data, International Journal of Structural Stability and Dynamics
  • Rahmani, F., Dutt, J. K. and Pandey, R. K. (2016) Performance Behavior of Elliptical-bore Journal Bearings Lubricated with Solid Granular Particulates, Particuology 27, pp 51-60
  • Rathod, D. W., Singh, P. K., Pandey, S. and Aravindan, S. (2016) Effect of Buffer-layered Buttering on Microstructure and Mechanical Properties of Dissimilar Metal Weld Joints for Nuclear Plant Application, Material Science and Engineering, pp. 100-113
  • Rathod, D. W., Pandey, S., Singh, P. K. and Prasad, R. (2016) Mechanical Properties Variations and Comparative Analysis of Dissimilar Metal Pipe Welds in Pressure Vessel System of Nuclear Plant, Journal of Pressure Vessel and Technology, 138, 011403
  • Roy, H. K., Das, A. S. and Dutt, J. K. (2016) An Efficient Rotor Suspension with Active Magnetic Bearings having Viscoelastic Control Law, Mechanism and Machine Theory, 98, pp. 48-63
  • Roy, H. and Dutt, J. K. (2016) Dynamics of Polymer and Polymer Composite Rotors - An Operator Based Finite Element Approach, Applied Mathematical Modelling, 40, pp. 1754-1768
  • Sankarasubramanian, H., Chawla, A., Mukherjee, S. and Goehlich, D.(2016) Optimization Study on Multibody Vehicle-front Model for Pedestrian Safety, International Journal of Crashworthiness 21, pp. 63-78
  • Shakya, P., Darpe, A. K. and Kulkarni, M. S. (2016) Bearing Diagnosis using Proximity Probe and Accelerometer, Journal International Measurement Confederation, 80 ,pp. 190-200
  • Sharma, E., Smanta, A., Pal J., Bahga, S. S. and Srivastava R. K. (2016) High Internal Phase Emulsion Ring-Opening Polymerization of Pentadecanolide: Strategy to Obtain Porous Scaffolds in a Single Step, Macromolecular Chemistry and Physics, 217, pp.1752-175
  • Sharma, V. and Pandey, P. M. (2016) Comparative Study of Turning of 4340 Hardened Steel with Hybrid Textured Self-Lubricating Cutting Inserts, Materials and Manufacturing Processes, 31, pp. 1904-1916
  • Sharma, V. and Pandey, P. M. (2016) Geometrical Design Optimization of Hybrid Textured Self-lubricating Cutting Inserts for Turning 4340 Hardened Steel, International Journal of Advanced Manufacturing Technology, pp. 1-15
  • Sharma, V. and Pandey, P. M. (2016) Optimization of Machining and Vibration Parameters for Residual Stresses Minimization in Ultrasonic Assisted Turning of 4340 Hardened steel, Ultrasonics, 70, pp. 172-182
  • Singh, J. P., Pandey, P. M. and Verma, A. K. (2016) Fabrication of Three Dimensional Open Porous Regular Structure of PA-2200 for Enhanced Strength of Scaffold using Selective Laser Sintering’, Rapid Prototyping Journal, 22, pp 752-765
  • Singh, K., Premachandran, B., Ravi, M. R., Suresh, B. and Vasudev, S. (2016) Prediction of Film Cooling Effectiveness over a Flat Plate from Film Heating Studies, Numerical Heat transfer Part-A 69(5), pp 529-544
  • Singh, K. and Premachandran, B. (2016) Analysis of Turbulent Natural and Mixed Convection Flows using the v2-f Model, Journal of Heat Transfer, 138, 062502
  • Singh, K., Premachandran, B. and Ravi, M. R. (2016) Experimental and Numerical Studies on Film Cooling of a Corrugated surface, Applied Thermal Engineering,108, pp. 312-329
  • Singh, K, Premachandran, B. and Ravi, M. R. (2016) Experimental Assessment of Film Cooling Performance of Short Cylindrical Holes on a Flat Surface, Heat and mass transfer/Waerme-und Stoffuebertragung’9 , pp. 1-14
  • Singh, N. K., Pandey, P. M. and Singh, K. K. (2016) EDM with an Air-Assisted Multi-Hole Rotating Tool, Materials and Manufacturing Processes, 31, pp. 1872-1878
  • Sudeep, U., Tandon, N. and Pandey, R. K. (2016) Comparisons of Tribological and Vibration Behaviors of Textured Point Contacts of Bearing Steel Lubricated with Oil and Grease under Starved Conditions, Journal of Tribology, 138, 031504
  • Sudeep, U., Tandon, N. and Pandey, R. K. (2016) Vibration Studies of Lubricated Textured Point Contacts of Bearing Steels due to Surface Topographies: Simulations and Experiments, Tribology International, 102, pp. 265-274
  • Udayraj, Talukdar, P., Das, A. and Alagirusamy, R. (2016) Heat and Mass Transfer through Thermal Protective Clothing -A review, International Journal of Thermal Sciences, 106, pp. 32-56
  • Udayraj, Talukdar, P., Das, A. and Alagirusamy, R. (2016) Estimation of Radiative Properties of Thermal Protective Clothing, Applied Thermal Engineering, 100, pp. 788-797
  • Udayraj, Talukdar, P., Das, A. and Alagirusamy, R. (2016) Development of Correlations and Artificial Neural Network Models to Predict Second-Degree Burn Time for Thermal-Protective Fabrics, Journal of Textile Institute, 25, pp. 1-13
  • Verma, G. C., Pandey, P. M. and Kala, P. (2016) Experimental investigations into internal magnetic abrasive finishing of pipes, International Journal of Advanced Manufacturing Technology, pp. 1-12
  • Yuvaraj, N., Aravindan, S. and Vipin (2016) Wear Characteristics of Al5083 Surface Hybrid Nano-composites by Friction Stir Processing, Transaction of Indian Institute of Metals, pp. 1-19