Publication Details

  • Agarwal, S., & Venkateswara Rao, P. (2012). Predictive modeling of undeformed chip thickness in ceramic grinding. International Journal of Machine Tools and Manufacture, 56, 59-68.  
  • Asjad, M., Kulkarni, M.S. & Gandhi, O.P. (2012). A conceptual framework for analyzing, improving and optimizing supportability of mechanical systems. International Journal of Strategic Engineering Asset Management, 1(2), 135-152.
  • Bahinipati, B. K., & Deshmukh, S. G. (2012). A conceptual framework for lateral collaboration in semiconductor industry supply networks. International Journal of Management and Enterprise Development, 12(2), 132-157.  
  • Bahinipati, B. K., & Deshmukh, S. G. (2012). E-markets and supply chain collaboration: A literature-based review of contributions with specific reference to the semiconductor industries. Logistics Research, 4(1-2), 19-38.  
  • Bahinipati, B. K., & Deshmukh, S. G. (2012). Vertical collaboration in the semiconductor industry: A decision framework for supply chain relationships. Computers and Industrial Engineering, 62(2), 504-526.  
  • Balaraman K. Mukherjee, S., Chawla, A., & Malhotra, R. (2012). Dynamic Compressive Response Of Passive Human Muscles Using Split Hopkinson Pressure Bar, Indian Journal of Biomechanics, 3(1-2).
  • Bhavsar, S. N., Aravindan, S., & Rao, P. V. (2012). Experimental investigation of redeposition during focused ion beam milling of high speed steel. Precision Engineering, 36(3), 408-413.
  • Bhavsar, S. N., Aravindan, S., & Rao, P. V. (2012). Machinability study of cemented carbide using focused ion beam (FIB) milling. Materials and Manufacturing Processes, 27(10), 1029-1034.
  • Bhore S. P., & Darpe A. K., (2012). Nonlinear frequency response analysis of rotor supported on air foil journal bearing under amplitude and frequency dependent external disturbances, Proceedings of the International Conference on Noise and Vibration Engineering (ISMA-2012), KU Leuven, Belgium, 17-19 September 2012 KU Leuven, Editors P Sas, D Moens and S Jonckheere, 1323-1336.
  • Chan, F. T. S., Chan, H. K., & Jain, V. (2012). A framework of reverse logistics for the automobile industry. International Journal of Production Research, 50(5), 1318-1331.  
  • Chandra, R., Vijay, V. K., Subbarao, P. M. V., & Khura, T. K. (2012). Production of methane from anaerobic digestion of jatropha and pongamia oil cakes. Applied Energy, 93, 148-159.  
  • Chouksey, M., Dutt, J. K., & Modak, S. V. (2012). Modal analysis of rotor-shaft system under the influence of rotor-shaft material damping and fluid film forces. Mechanism and Machine Theory, 48(1), 81-93.  
  • Das, A. S., & Dutt, J. K. (2012). A reduced rotor model using modified SEREP approach for vibration control of rotors. Mechanical Systems and Signal Processing, 26(1), 167-180.  
  • Das, L., Aggarwal, M., Rajkumar, K., Aravindan, S., & Gupta, M. (2012). Tribological properties of magnesium nano-alumina composites under nano-graphite lubrication. Tribology Transactions, 55(3), 334-344.  
  • Desai, K. A., & Rao, P. V. M. (2012). On cutter deflection surface errors in peripheral milling. Journal of Materials Processing Technology, 212(11), 2443-2454.  
  • Dhandole, S., & Modak, S. V. (2012). A constrained optimization based method for acoustic finite element model updating of cavities using pressure response. Applied Mathematical Modelling, 36(1), 399-413.  
  • Dhandole, S. D., & Modak, S. V. (2012). Vibro-acoustic FE model updating of structural-acoustic cavities for accurate interior noise prediction. Journal of the acoustical society of India, 39(2), 51-62.
  • Gupta, A., & Kundra, T. K. (2012). A review of designing machine tool for leanness. Sadhana - Academy Proceedings in Engineering Sciences, 37(2), 241-259.  
  • Gupta, M., Rajora, R., Sahai, S., Shankar, R., Ray, A., & Kale, S. R. (2012). Experimental evaluation of fire suppression characteristics of twin fluid water mist system. Fire Safety Journal, 54, 130-142.
  • Jain, P., Chopra, K., & Darpe, A. K. (2012). Use of bispectrum in severity analysis of rotor bar cracks in induction motors. Advances in Vibration Engineering, 11(3), 317-323.  
  • Jain, P., Singhal, A., & Rao, P. V. M. (2012). Portable braille reader. Paper presented at the ASME 2012 Summer Bioengineering Conference, SBC 2012, 1327-1328.  
  • Jain, V. (2012). Special issue on sustainable supply chain management and reverse logistics. International Journal of Production Research, 50(5), 1239-1242.  
  • Jain, V. K., Jain, P. K., & Rao, P. V. (2012). Editorial: Micromachining. International Journal of Advanced Manufacturing Technology, 61(9-12), 1173-1174.  
  • Jani, D., Chawla, A., Mukherjee, S., Goyal, R., Vusirikala, N., & Jayaraman, S. (2012). Repositioning the knee joint in human body FE models using a graphics-based technique. Traffic Injury Prevention, 13(6), 640-649.  
  • Jani, D., Chawla, A., Mukherjee, S., & Khattri, R. (2012). DARSS: A hybrid mesh smoother for all hexahedral meshes. Engineering with Computers, 28(2), 179-188.  
  • Jani, D., Chawla, A., Mukherjee, S., Goyal, R., Vusirikala, N., & Jayaraman, S. (2012) Repositioning Human Body FE Models - and a case study for the lower extremity model, Traffic Injury Prevention, DOI No. 10.1080/15389588.2012.664669, April 2012
  • Karn, A., Kumar, M., Singh, V. N., Mehta, B. R., Aravindan, S., & Singh, J. P. (2012). Growth of indium oxide and zinc-doped indium oxide nanostructures. Chemical Vapor Deposition, 18(10-12), 295-301.
  • Kumar Singh, A., Jha, S., & Pandey, P. M. (2012). Nanofinishing of a typical 3D ferromagnetic workpiece using ball end magnetorheological finishing process. International Journal of Machine Tools and Manufacture, 63, 21-31.  
  • Kumar, G., Jain, V., & Gandhi, O. P. (2012). Reliability and availability analysis of mechanical systems using stochastic petri net modeling based on decomposition approach. International Journal of Reliability, Quality and Safety Engineering, 19(1)  
  • Kumar, N., & Singh, S. P. (2012). Vibration control of curved panel using smart damping. Mechanical Systems and Signal Processing, 30, 232-247.  
  • Kumar, R., Singh, K., & Pandey, S. (2012). Process forces and heat input as function of process parameters in AA5083 friction stir welds. Transactions of Nonferrous Metals Society of China (English Edition), 22(2), 288-298.  
  • Kundu, A., & Jain, V. (2012). A multi-objective optimization approach for complex procurement systems. Paper presented at the Proceedings of International Conference on Computers and Industrial Engineering, CIE, , 1161-170.  
  • Lad, B. K., & Kulkarni, M. S. (2012). Optimal maintenance schedule decisions for machine tools considering the user's cost structure. International Journal of Production Research, 50(20), 5859-5871.
  • Maheshwari, A. V., Chawla, A., Osuji, O. U., Malhotra, R., & Gulati, Y. P. (2012). Fracture of the outer metallic head of the bipolar hip prosthesis: An unusual bearing surface failure. Journal of Arthroplasty, 27(2), 323.e9-323.e12.  
  • Modak, S. V., Kundra, T. K., & Singh, G. (2012). Dynamic design through modal modals obtained by operational modal analysis. Advances in Vibration Engineering, 11(1), 99-112.  
  • Mulik, R. S., & Pandey, P. M. (2012). Experimental investigations and modeling of finishing force and torque in ultrasonic assisted magnetic abrasive finishing. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 134(5)  
  • Mulik, R. S., Srivastava, V., & Pandey, P. M. (2012). Experimental investigations and modeling of temperature in the work-brush interface during ultrasonic assisted magnetic abrasive finishing process. Materials and Manufacturing Processes, 27(1), 1-9.  
  • Muzakkir, S. M., Hirani, H., & Thakre, G. D. (2012). Performance evaluation of journal bearings used in sugar mills using taguchi method. Paper presented at the Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2012, 121-123.  
  • Pandey, D., Kulkarni, M. S., & Vrat, P. (2012). A methodology for simultaneous optimisation of design parameters for the preventive maintenance and quality policy incorporating taguchi loss function. International Journal of Production Research, 50(7), 2030-2045.  
  • Panneerselvam, K., Aravindan, S., & Noorul Haq, A. (2012). Study on resistance welding of glass fiber reinforced thermoplastic composites. Materials and Design, 41, 453-459.  
  • Parwani, A. K., Talukdar, P., & Subbarao, P. M. V. (2012). Estimation of inlet temperature of a developing fluid flow in a parallel plate channel. International Journal of Thermal Sciences, 57, 126-134.
  • Parwani, A. K., Talukdar, P., & Subbarao, P. M. V. (2012). Estimation of strength of source in a 2D participating media using the differential evolution algorithm. Journal of Physics: Conference Series, 369(1)  
  • Patel, M., Kundu, A., & Jain, V. (2012). A two-phase constrained chaotic bee colony approach towards managing coopetition in supply chain. Paper presented at the Proceedings - 2012 3rd International Conference on Emerging Applications of Information Technology, EAIT 2012, 260-263.  
  • Patel, V. N., Tandon, N., & Pandey, R. K. (2012). Defect detection in deep groove ball bearing in presence of external vibration using envelope analysis and duffing oscillator. Measurement: Journal of the International Measurement Confederation, 45(5), 960-970.  
  • Patel, V. N., Tandon, N., & Pandey, R. K. (2012). Improving defect detection of rolling element bearings in the presence of external vibrations using adaptive noise cancellation and multiscale morphology. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 226(2), 150-162.  
  • Ponappa, K., Aravindan, S., & Rao, P. V. (2012). Grinding of magnesium /Y2O3 metal matrix composites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226(10), 1675-1683.  
  • Pradhan, S., & Modak, S. V. (2012). A method for damping matrix identification using frequency response data. Mechanical Systems and Signal Processing, 33, 69-82.  
  • Pradhan, S., & Modak, S. V. (2012). A review of damping matrix identification methods in structural dynamics. Paper presented at the ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), , 12 275-289.  
  • Pradhan, S., & Modak, S. V. (2012). Normal response function method for mass and stiffness matrix updating using complex FRFs. Mechanical Systems and Signal Processing, 32, 232-250.
  • Prakash, A., Chan, F. T. S., & Deshmukh, S. G. (2012). Application of knowledge-based artificial immune system (KBAIS) for computer aided process planning in CIM context. International Journal of Production Research, 50(18), 4937-4954.  
  • Prakash, A., Chan, F. T. S., Liao, H., & Deshmukh, S. G. (2012). Network optimization in supply chain: A KBGA approach. Decision Support Systems, 52(2), 528-538.  
  • Prathap, C., Ray, A., & Ravi, M. R. (2012). Effects of dilution with carbon dioxide on the laminar burning velocity and flame stability of H 2-CO mixtures at atmospheric condition. Combustion and Flame, 159(2), 482-492.  
  • Pratihar, A. K., Kaushik, S. C., & Agarwal, R. S. (2012). Performance evaluation of a small capacity compression-absorption refrigeration system. Applied Thermal Engineering, 42, 41-48.
  • Rahim, A., Alkhafagiy, D., & Talukdar, P. (2012). Effect of casing geometry on flow characteristics in a model can-combustor. Paper presented at the ASME 2012 Gas Turbine India Conference, GTINDIA 2012, 73-78.  
  • Rajkumar, K., Aravindan, S., & Kulkarni, M. S. (2012). Wear and life characteristics of microwave-sintered copper-graphite composite. Journal of Materials Engineering and Performance, 21(11), 2389-2397.  
  • Rawal, B. R., & Bhatnagar, N. (2012). An investigation on the effect of groove dimensions and inclination on cementless femoral component in hip arthroplasty. Paper presented at the ASME 2012 Summer Bioengineering Conference, SBC 2012, 1003-1004.  
  • Rawal, B. R., Ribeiro, R., Malhotra, R., & Bhatnagar, N. (2012). Anthropometric measurements to design best-fit femoral stem for the indian population. Indian Journal of Orthopaedics, 46(1), 46-53.
  • Rawal, B. R., Ribeiro, R., Malhotra, R., & Bhatnagar, N. (2012). Design and manufacturing of femoral stems for the indian population. Journal of Manufacturing Processes, 14(3), 216-223.
  • Sahoo, A. K., Soni, S. K., Rao, P. V., & Ghosh, S. (2012). Use of solid lubricants like graphite and MoS2 to improve grinding of ti-6Al-4V alloy. International Journal of Machining and Machinability of Materials, 12(4), 297-307.  
  • Sakhuja, S., & Jain, V. (2012). Service supply chain: An integrated conceptual framework. Paper presented at the Proceedings of International Conference on Computers and Industrial Engineering, CIE, , 2 817-825.  
  • Samvedi, A., & Jain, V. (2012). Effect of sharing forecast information on the performance of a supply chain experiencing disruptions. International Journal of Logistics Systems and Management, 13(4), 509-524.  
  • Samvedi, A., Jain, V., & Chan, F. T. S. (2012). An integrated approach for machine tool selection using fuzzy analytical hierarchy process and grey relational analysis. International Journal of Production Research,50(12), 3211-3221.  
  • Senthilkumaran, K., Pandey, P. M., & Rao, P. V. M. (2012). Statistical modeling and minimization of form error in SLS prototyping. Rapid Prototyping Journal, 18(1), 38-48.  
  • Shah, M., Talukdar, P., & Subbarao, P. M. V. (2012). Modeling of gray gas radiation with different shapes of heat source in three-dimensional enclosures. Heat Transfer Engineering, 33(7), 651-660.
  • Shah, S. V., Saha, S. K., & Dutt, J. K. (2012). Denavit-hartenberg parameterization of euler angles. Journal of Computational and Nonlinear Dynamics, 7(2)  
  • Shah, S. V., Saha, S. K., & Dutt, J. K. (2012). Modular framework for dynamic modeling and analyses of legged robots. Mechanism and Machine Theory, 49, 234-255.  
  • Shakya, P., Darpe, A. K., & Kulkarni, M. S. (2012) Use of Mahalanobis Taguchi system as data fusion approach for monitoring health of rolling element bearing, Proceedings of the International Conference on Noise and Vibration Engineering (ISMA-2012), Leuven, 17-19 September 2012 KU Leuven, Editors P Sas, D Moens and S Jonckheere, 2012, 3389-3402.
  • Sharma, P., Gupta, S., Das, A. S., & Dutt, J. K. (2012). Active vibration control of flexible rotor-shaft system subject to earthquake. Paper presented at the ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), , 4(PARTS A AND B) 795-805.  
  • Shukla, D. K., & Pandey, S. (2012). Dilution control by advanced submerged arc welding. Advanced Materials Research. 488-489, 1737-1741.   
  • Singh, A. K., Jha, S., & Pandey, P. M. (2012). Magnetorheological ball end finishing process. Materials and Manufacturing Processes, 27(4), 389-394.  
  • Singh, A. K., Jha, S., & Pandey, P. M. (2012). Nanofinishing of fused silica glass using ball-end magnetorheological finishing tool. Materials and Manufacturing Processes, 27(10), 1139-1144.
  • Singh, A. K., Jha, S., & Pandey, P. M. (2012). Parametric analysis of an improved ball end magnetorheological finishing process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226(9), 1500-1563.  
  • Singh, G., Chander, S., & Ray, A. (2012). Heat transfer characteristics of natural gas/air swirling flame impinging on a flat surface. Experimental Thermal and Fluid Science, 41, 165-176.
  • Singh, I., Bajpai, P. K., Malik, D., Madaan, J., & Bhatnagar, N. (2012). Microwave joining of natural fiber reinforced green composites   
  • Singh, R. C., Chaudhary, R., Pandey, R. K., & Maji, S. (2012). Experimental studies for the role of piston rings' face profiles on performance of a diesel engine fueled with diesel and jatropha based biodiesel. Journal of Scientific and Industrial Research, 71(1), 57-62.  
  • Singh, V., Ghosh, S., & Rao, P. V. (2012). Grindability improvement of AlSiTi conductive ceramic. Materials and Manufacturing Processes, 27(2), 214-220.  
  • Soni, S. K., Singh, V., Sahoo, A. K., & Ghosh, S. (2012). Improvement in grinding of composite ceramic by using cryogenic cooling technique. International Journal of Manufacturing Technology and Management, 25(1-3), 60-77.  
  • Srikanth, D., & Kulkarni, M. S. (2012). Quality, reliability and maintenance (Q, R & M) issues in reconfigurable manufacturing systems (RMS)   
  • Srivastava, V., & Pandey, P. M. (2012). Effect of process parameters on the performance of EDM process with ultrasonic assisted cryogenically cooled electrode. Journal of Manufacturing Processes, 14(3), 393-402.  
  • Srivastava, V., & Pandey, P. M. (2012). Performance evaluation of electrical discharge machining (EDM) process using cryogenically cooled electrode. Materials and Manufacturing Processes, 27(6), 683-688.  
  • Sundarraman, P., Saha, S. K., Vasa, N. J., Baskaran, R., Sunilkumar, V., & Raghavendra, K. (2012). Modeling and analysis of a fuel-injection pump used in diesel engines. International Journal of Automotive Technology,13(2), 193-203.  
  • Thakkar, J., Kanda, A., & Deshmukh, S. G. (2012). Supply chain issues in indian manufacturing SMEs: Insights from six case studies. Journal of Manufacturing Technology Management, 23(5), 634-664.
  • Udai, A. D., & Saha, S. K. (2012). Simulation of force control algorithms for serial robots. Paper presented at the 2012 IEEE/SICE International Symposium on System Integration, SII 2012, 481-486.
  • Uthayakumar, M., Prabhakaran, G., Aravindan, S., & Sivaprasad, J. V. (2012). Influence of cutting force on bimetallic piston machining by a cubic boron nitride (CBN) tool. Materials and Manufacturing Processes, 27(10), 1078-1083.  
  • Vedpal, Jain, V., & Bhatnagar, N. (2012). Four C's in supply chain management: Research issues and challenges. Paper presented at the Proceedings - 2012 3rd International Conference on Emerging Applications of Information Technology, EAIT 2012, 264-267.  
  • Verma, S., Jain, V., & Majumdar, A. (2012). Modeling an agile supply chain: Research challenges and future directions. Proceeding of International Conference on SocProS. 277-285.