People
Alumni (Ph.D.)
2008
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Tyagi, Charu | Developmant of polymer materices for enzyme linked immunosorbent assay. | Singh, Harpal (CBME - IITD ) |
| Thakkar, Jitesh J. | Study of supply chain management practices in small and medium scale enterprises(SMES):a CASE OF INDIAN MANUFACTURING. | Kanda, Arun (ME - IITD ) |
| Varma, Siddharth | Performance evaluation of the process industry supply chain:case of the petroleum industry in india. | Deshmukh, S.G. (ME - IIT ) |
| Madann, Jitendra | Enterprices system with flexibility:some studies on performamce improvement. | Wadhwa, S. (ME - IIT ) |
| Patel, Tejas Harikaishanbhai | Multi-janlt modelling and analysis of rotor. | Darpe, A.K. |
| Hanzaki, Ali Rahmani | Kinematic optimization and dynamics of steering linkages. | Saha, S.K. (ME - IIT ) |
2007
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Chak, Sanjay Kumar | Experimental investigation on ECDM process improvement while machining AI2O3 and sic. | Rao, P.Venkateswara (ME - IITD ) |
| Mishra, Madhawanand | Modelling and analysis of agile mancyactering:a supply chain management perspective. | Wadhwa, Subhash (ME - IIT ) |
| Arulmani, R. | Surfacing through plasma enhanced shielded metal arc welding. | Pandey, Sunil (ME - IIT ) |
| Murari, Bhaskar Mohan | Novel sol-gel thin film based fluorescence technique for ovantitation of myoglobin:a cardial marker. | Anand, Sneh (BME - IIT ) |
| Rao, A.N. Hari | Investigation into the erosive of pipline and bends in a pneumatic conveying system. | Agarwal, V.K. (ITMMEC - IIT ) |
| Singh, Dilbag | Some investigations on the hard turning of bearing steel (AISI 52100) with mixed ceramic inserts. | Rao, Venkateswara (ME - IITD ) |
| Sharma, Garima ; Ms. | Effect of biomechanical stresses on biochemical and morphological properties of articular cartilage chondrocytes. | Saxena, R.K. (CBE - IITD ) |
| Parhi, Purnendu | Studies on biologically active phosphates and related materials. | Ray, A.R. (CBME - IITD ) |
| Raja, M.Palani Natha | Measurement of service quality in engineering education and health care. | Deshmukh, S.G. (ME - IITD ) |
| shahi, Amandeep Singh | Some studies on stainless steel cladding using universal gas metal arc welding process | Pandey, Sunil (ME - IIT Delhi ) |
| Rajesh Kumar | Studies of the hydrodynamic bearings with surface profiling and entrained solid particulate | Pandey, R.K. (ITMMEC - IIT Delhi ) |
| Singh, Kulwant | Some studies in recycling of submerged arc welding slag as a flux | pandey, Sunuil (ME - IIT Delhi ) |
| Kaur, Arshinder ; Ms. | Integrative framework for supply chain coordination | Kanda, Arun (ME - IIT Delhi ) |
| panda, sushanta Kumar | Formability of tailor-welded blanks of low-carbon steels in stretch forming | Ravi Kumar, D (ME - IIT Delhi ) |
| Madan, jatinder | Automated approach to manufacturability assessment of die cast parts | Madhusudan Rao, P.V. (ME - IITD ) |
| Agarwal, Sanjay | Modeling and experimental investigation for assessing surface interrity in Sic grinding. | Rao, Venkateswara P. (ME - IITD ) |
| Asati, Arun Kumar | Perfomance studies of falling films abrorber regenertor using triethline glycol as desiccant. | Jain, Sanjeev (ME - IITD ) |
| Navin, Kumar | Vibration control of panels using hybrid active constrained layer damping. | Singh, S.P. (ME - IITD ) |
| Ramakrishan, K.M. | Detection of induction motor bearing faults using condition monitoring tchniques. | Tandon, N. (ITMMEC - IITD ) |
| Shankar, R. | Performance evalvation of software quality:a select study. | kanda, Arun (ME - IITD ) |
2006
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Prathiiikar, Anil Kumar | Simulation and optimization compression-absorption refrigeration system. | Kaushik, S.C. (CES - IITD )Agarwal, R.S. ( ME - IITD ) |
| G., Anand | Computational and experimental investigation on spark ignition engines using menthane-rich gasous fuels. | Subrahmanyam, J.P. (ME - IITD )Ravi, M.R. ( ME - IITD ) |
| Mohammed, Ali | Study of flezible manufacturing system in CIMS context. | Wadhwa, Subhash (ME - IITD )Rao, P.V. ( ME - IITD ) |
| Mukherjee, Monalisa ; Ms. | Studies on heme proteins mimetic materials. | Ray, Alok R. (CBME - IITD ) |
| Seth, Nitin | Service quality in supply chain:a study of indian manufacturing organisations. | Vrat, Prem (U.P. - Technical University )Deshmukh, S.G. ( ME - IITD ) |
| Subhash, Chander | Heat transfer charcteristics of laminar methane/air flames impingig on flat and cylindrical surfaces. | Ray, Anjan (ME - IITD ) |
| Ashish, Mohan | Dynamic analysis of flexible multibody robotic system. | Saha, S.K. (M.E - IITD ) |
| Gajre, Suhas Sudhakarrao | Studies on eletroimpedance and electromyographic signals to assess early diagnosis of knce osteoarthritism moninvasively. | Anand, Sneh (CBME - IITD )Saxena, R.K. ( CBME - IITD ) |
| Upadhyay, Parag Ramkrishna | Computer aided design and analysis of permanent magnet brushless DC motors. | Rajagopal, K.R. (EE - IITD ) |
| Amit, Kumar | Polymeric hydrogel based insuline delivery system. | Singh, Harpal (CBME - IITD ) |
| Man, Mohan | Reliability,efficiency and maintenance studies for commercial availability of steam power plants using graph theory and matrix approach. | Agrawal, V.P. (BITS - IITD )Gandhi, OP. ( ITMMEC - IITD ) |
| Wattal, Reeta ; Mrs. | Bead geometry and shape relationship in GMAW of aluminium alloy 7005. | Pandey, Sunil (ME - IITD ) |
| Mistry, Pankaj Kumar J | Dilution control through advanced gas metal arc welding process. | Pandey, Sunil (ME - IITD ) |
| Kamble, Naresh Dayanand | Studies and analysis of the rack and pinion steering gear. | Saha, S.K. (ME - IITD ) |
| Avdhesh, Kumar | Simulation of a biomass gasifier-engine system. | Ravi, M.R (ME - IITD ) |
| Jain, Vipul | Hybrid approaches to modal supplies related issues in a dynamic supply chain. | Deshmukh, S.G. (ME - IITD ) |
| Rao, Vinja subba | Tool deflection compensation in peripheral milling of curved geometries | Madhusudan Rao, P.V. (ME - IITD ) |
| Rekha, Rattan ; Ms. | Investigations on mechanical and tribological properties of carbon fabric reinforced polyetherimide composites. | Bijwe, Jayashree (ITMMEC - IITD ) |
| Rachna, Prasad | Combinatonal approach for transdermal delivery of methotrexate using chemical and eletrical anhancers. | Anand, Sneh (CBME - IITD )Koul, Veena ( CBME - IITD ) |
| Vaidya, Abhijeet Mohan | Investigation of mixture formation process in various cylinder and injection configurations of DI-SI engines through multidimensional modelling | Gaur, R.R. (Mechanical Engineering - IIT Delhi ) |
2005
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Bhoon, K.S. | Collaboration in supply chain management:challenges and opportunities. | Subhash, Wadhwa (ME - IITD )Kanda, Arun - IITD ) |
| Thiruchitrambalam, S. | Application of plasma enhanced shielded metal arc welding (PESMAW)of mild steel. | Panday, Sunil (ME - IITD ) |
| Jain, Rachna ; Ms. | Studies on the development of radiation grafted antimicrobial polypropylene sutures. | Singh, Harpal (CBME - IITD )Gupta, Bhuvanesh ( TT - IITD ) |
| Amod, Kumar. | Quantitative estimation of depth of anesthesia using electroence phalographic and auditory evoked potential signals. | Anand, Sneh (CBME - IITD ) |
| Saravanan, S. | Condition monitoring studies on a lathe and fault diagnosis using ann | Yadava, G.S. (Industrail Tribology Machine Dynamics - IIT Delhi )Rao, P.V. ( Industrail Tribology Machine Dynamics - IIT Delhi ) |
| Manoj Kumar | Modeling vender related issues in contexts of supply chains | Vrat, Prem (Mechanical Engineering - IITR )Shankar, Ravi ( Mechanical Engineering - IIT Delhi ) |
| Mittal, Murari Lal | Multi-project Scheduling with resource transfers | Kanda, Arun (Mechanical Engineering - IIT Delhi ) |
| Sharma, Brijesh Kumar | Reliability and safety analysis of lubricated systems for maintenance consideration | Gandhi, O.P. (Industrail Tribology Machine Dynamic - IIT Delhi ) |
| Reddy, N.Suresh Kumar | An experimental investigation to enhance performance of end milling under dry and solid lubricant assisted machining | Rao, P.Venkateswara (Mechanical Engineering - IIT Delhi ) |
| Sahu, Pramod | Development of alternative cut-off wheel | Sagar, R. (Mechanical Engineering - IIT Delhi ) |
| Parey, Anand | Dynamic modeling and signal processing of spur gear viberation for the detection of faults | Tandon, N. (Industrail Tribology Machine Dynamic - IIT delhi ) |
| Kashava, Murthy T.V. | Combustion characteristics of multicomponent-fuel-air mixtures | Ravi, M.R. (Mechanical Engineerin - IIT Delhi )Ray, Anjan ( Mechanical Engineering - IIT Delhi ) |
| Mohan, Narndra | Design of agglomerated fluxes and their effect on weld metal composition and weldability in submerged arc welding | Panday, Sunil (Mechanical Engineering - IIT Delhi ) |
| Jayshree, G. | Neurophysiological correlates of volitional actions for brain computer interface systems | Anand, Sneh (Biomedical Engineering - IIT Delhi ) |
| Agarwal, Rachna | Pulmonary function assessment through non-invasive techniques-effects of exposure to air pollution | Anand, Sneh (Biomedical Engineering - IIT Delhi ) |
| Dutta, Ved Prakash | Studies in genetic algorithms based model updating and structural dynamic modification for dynamic design in mechanical systems | Kundra, T.K. (Mechanical Engineering - IIT Delhi ) |
2004
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Sharma, Manu | Studies on application of fuzzy logic for active vibration control of beams and plates using piezoelectric patches | Singh, S.P. (Mechanical Engineering - IIT Delhi ) |
| Gawade, Tushar Rajaram | Rollover stability and safety analysis of three wheelded vehicles | Mukherjee, Sudipto (Mechanical Engineering - IIT Delhi ) |
| Verma, Prakash | Dynamic modelling for emission control policies in the Delhi urban transport system | Vrat, Prem,Director (IIT Roorkee ) |
| Singh, Swadesh Kumar | Some investigation on hydro-mechanical deep drawing process | D., Ravi Kumar (Mechanical Engineering - IIT Delhi ) |
| Ramana, Kolla Venkata | Development of an automated manufacturability evaluation system for sheet metal components | Rao, P.V.Madhusudan (Mechanical Engineering - IIT Delhi ) |
| Nayak, Debasis | Machining studies of uni-directional fiber reinforced thermoset composites | Bhatnagar, Naresh (Mechanical Engineering - IIT Delhi ) |
| Amit Kumar | Optimal electrochemical enhancement of transdermal insulin delivery using polyacrylamide based hydrogel patches | Anand, Sneh (Biomedical Engineering - IIT Delhi ) |
| Vigneshwaran, N. | Biochemical and biophysical characterization of hemoglobin-advanced glycation end product and its relevance to diabetes mellitus | Gohil, N.Karmakar (Biomedical Engineering - IIT Delhi ) |
| Bhangale, PrasadKumar Prakash | Dynamics based modeling,computational complexity and architecture selection of robot manipulators | Saha, S.K. (Mechanical Engineering - IIT Delhi ) |
| Singh, Bhupal | Nonlinear model of the human craniospinal fluid system | Anand, Sneh (Biomedical Engineering - IIT Delhi ) |
| Singh, InderdeeP. | Studies on drilling of fiber reinforced plastic composites | Bhatnagar, Naresh (Mechanical Engineering - IIT Delhi ) |
| Rao, Abbaraju Bala Koteswara | Analysis and design of hexaslide manipulators for machine tool applications | Rao, P.V.M. (Mechanical Engineering - IIT Delhi ) |
2003
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Fuloria, Manas C. | Modelling and analysis of quick response supply chains in fashion industries | Wadhwa, Subhash (Mechanical Engineering - IIT Delhi ) |
| Janardan, M. | Quality and knowledge management practices in the Indian tyre industry | Kanda, Arun (Mechanical Engineering - IIT Delhi ) |
| Mishra, Somnath | Technological forecasting application to weapon systems in the Indian context | Deshmukh, S.G. (Mechanical Engineering - IIT Delhi ) |
| Rao, K. Srinivasa | Some studies on manufacturing and supply chain flexibility:decision-information synchronization perspective | Wadhwa, Subhash (Mechanical Engineering - IIT Delhi ) |
| Sharma, Shivani | Biophysical,biochemical and morphological correlates of action of the contraceptive-Risugtm on E.coli | Mukhopadyay, S.N. (Biochemical Engineering and Biotechnology - IIT Delhi ) |
| Purohit, Rajesh | Studies and development of Al-SiC Particulate composites for automotive applications | Sagar, R. (Mechnical Engineering - IIT Delhi ) |
| Harsha, A.P. | Abrasive and erosive wear performance of polyaryletherketones and their composites | Tewari, U.S. (Industrail Tribology Machine Dynamics and Maint. Engg. - IIT Delhi ) |
| Gopal, Anne Venu | Investigation on the influence of grinding parameters on surface integrity of SiC | Rao, P.Venkateswara (Mechanical Engineering - IIT Delhi ) |
| Khanna, V.K. | Total quality management in automobile sector:system dynamics approach | Vrat, Prem, (Director - IIT Roorkee ) |
| Darghlu, Maghsud Solimanpur | Development and analysis of heuristics in the design and planning of cellular manufacturing systems | Vrat, Prem, (Director - IIT Roorkee ) |
2002
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Samsher | Effect of blade surface roughness on profile loss and exit angle in a rectilinear steam turbine cascade | Rai, Lajpat ( Mecanical Engineering - IIT Delhi ) Kale, S.R. ( Mechanical Engineering - IIT Delhi ) |
| Anoop Kumar | Simulation of the capture of airborne particles by sprays | Kale, S.R. ( Mechanical Engineering - IIT Delhi ) Gupta, S.K. ( Mechanical Engineering - IIT Delhi ) |
| Pesteei, Seyed Mehdi | Experimental study of heat transfer enhancement and pressure drop in fin-tube heat exchangers using winglet vortex generators | Subbarao, P.M.V. ( Mechanical Engineering - IIT Delhi ) Agarwal, R.S. ( Mechanical Engineering - IIT Delhi ) |
| Satapathy, Bhabani Kumar | Performance evaluation of non-asbestos fiber reinforced organic friction materials | Bijwe, Jayashree ( Industrail Tribology Machine Dynamics - IIT Delhi ) |
| Anand, R.B. | Flow characteristics of s-shaped circular and rectangular diffusers | Singh, S.N. ( Applied Mechanics - IIT Delhi ) Rai, Lajpat ( Mechanical Engineering - IIT Delhi ) |
| Mya, Maung Maung | Immunological study of plasmodium falciparum malaria for field conditions | Roy, Arati ( Malaria Research Centre - Delhi ) Saxena, R.K. ( Biomedical Engineering - IIT Delhi and AIIMS ) |
| Srinivasan, K.S. | Fault diagnosis in rotating machines using vibration monitoring and artificial neural networks | Yadava, G.S.Nakra, B.C. |
| Rajesh, J.John | Investigations on abrasive and erosive wear behaviour of various polyamide their composites | Tewari, U.S. ( Industrail Tribology Machine Dynamics - IIT Delhi ) Bijwe, Jayashree ( Industrail Tribology Machine Dynamics - IIT Delhi ) |
| Singh, Mahavir | Experimental study of sound transmission through lightweight wall panels | Pujara, K.K. ( Mechanical Engineering - IIT Delhi ) |
| Rajesh Kumar | Investigation into the running in and steady state wear processes | Prakash, Braham ( Industrail Tribology Machine Dynamics - IIT Delhi ) Sethuramiah, A. ( Industrail Tribology Machine Dynamics - IIT Delhi ) |
| Darpe, Ashish | Dynamics of cracked rotors | Gupta, K. ( Mechanical Engineering - IIT Delhi ) Chawla, A. ( Mechanical Engineering - IIT Delhi ) |
2001
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Sumathi, S. | Evaluation of tamarind seed polysaccharide as hydrophilic matrix for controlled delivery of drugs | Ray, Alok R. ( Biomedical Engineering - IIT Delhi ) |
| Reddy, K.Rama Bhopal | Some studies on design and evaluation of alternative manufacturing system configurations | Wadhwa, Subhash ( Mechanical Engineering - IIT Delhi ) Chawla, Anoop ( Mechanical Engineering - IIT Delhi ) |
| Madhu, D. | Study of condensing heat transfer characteristics of R-134a and mixtures of HFCs inside a horizontal tube | Agarwal, R.S. ( Mechanical Engineering - IIT Delhi ) Gupta, S.K. ( Mechanical Engineering - IIT Delhi ) |
| Padmanabham, G. | Some studies on pulsed-GMAW of Al-Cu-Li-Mg-Zr alloy | Pandey, Sunil ( Mechanical Engineering - IIT Delhi ) |
| Choudhary, Tika Ram | Tribological investigation of heavy duty polymer based thrust pads | Sethuramiah, A. ( Industrail Tribology Machine Dynamics - IIT Delhi ) Prakash, Om ( Industrail Tribology Machine Dynamic - IIT Delhix ) |