People
Alumni (Ph.D.)
2001
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Subramaniam, M. | Design and optimization of catalytic converter for spark ignition engines | Subrahmanyam, J.P. ( Mechanical Engineering - IIT Delhi ) Babu, M.K.Gajendra ( Centre for Energy Studies - IIT Delhi ) |
| Dangayach, Govind Sharan | Some issues in manufacturing strategy:a select study of Indian manufacturing companies | Deshmukh, S.G. ( Mechanical Engineering - IIT Delhi ) |
2000
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Sunil Kumar | Influences of soot formation and radiation on spherically symmetric droplet combustion | Ray, Anjan ( Mechanical Engineering - IIT Delhi ) |
| Vakharia, Dipak Kumar Pravin chandra | Estimation of rolling element bearing temperature through theoretical and experimental methods | Athre, K. ( Mechanical Engineering - IIT Delhi ) |
| Indumathi, J | Friction and wear studies on polyetherimide and composites | Bijwe, J. ( Industrail Tribology Machine Dynamics - IIT Delhi ) |
| Adarsh Kumar | Effect of whole body vibrations on tractor drives:an ergonomic and medical investigation | Mahajan, Puneet ( Applied Mechanics - IIT Delhi ) |
| Singh, Anil Kumar | Stress analysis of LP stage steam turbine blades | Ramkrishnan, C.V. ( Applied Mechanics - IIT Delhi ) |
| Tyagi, Madhulika ;Ms. | Iodine containing antimicrobial polymers for biomedical applications | Rattan, Ashok ( Ranbaxy Laboratories - Delhi ) |
| Bharathi, M.D. | An investigation into the influence of material properties on the pneumatic conveying capability of fly Ash | Agarwal, V.K. ( Industrail Tribology Machine Dynamics and Maint. Engg. - IIT Delhi ) |
| Gurban, R.B. | Dynamic stress analysis and optimization studies | |
| Suresh Kumar | Heat and transfer studies on air water spray international | Dhar, P.L. ( Mechanical Engineering - IIT Delhi ) |
| Narasimha Rao, T.V.V.L | Theoretical and experimental investigation on stability and cavitation of hydrodynamic bearing | Biswas, S. ( Industrail Tribology Machine Dynamics and Maint. Engg. - IIT Delhi ) |
| Gupta, Pramod Kumar | An investigation into large deformation behaviour of metallic tubes | Sekhon, G.S. ( Applied Mechanics - IIT Delhi ) |
1999
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Singh, Shailendra | Investigation in traverse cold rolling | Juneja, B.L. ( Mechanical Engineering - IIT Delhi ) |
| Govil, Gyan P. | Investigations on a dual fuel engine using diesel and biogas for performance optimization and conversion kits | Gour, R.R. ( Mechanical Engineering - IIT Delhi ) |
| Tewari, Prakash G. | Studies on a producer gas operated spark ignition engine converted from a single cylinder diesel engine | Gajendra Babu, M.K. ( Centre for Energy Studies - IIT Delhi ) Subrahmanyam, J.P. ( Mechanical Engineering - IIT Delhi ) |
| Chandra, Rakesh | Some micromechanical studies on damping in fiber-reinforced composites | Gupta, K. ( Mechanical Engineering - IIT Delhi ) Singh, S.K. ( Mechanical Engineering - IIT Delhi ) |
| Sharma, Chitra | Technology forecasting, planning and implementation in the Indian engineering industry-a flexible systems study | Gupta, A.D. ( Mechanical Engineering - IIT Delhi ) Sushil ( Management Studies - IIT Delhi ) |
| Sai Rama Narayana, Peddi | Finite element model updating and modification for dynamic mechanical structures | Nakra, B.C. ( Mechanical Engineering - IIT Delhi ) Kundra, T.K. ( Mechanical Engineering - IIT Delhi ) |
| Garg, Suresh Kumar | Impact of technological flexibility,multi skilled workforce and supply attributes in jit manufacturing systems | Kanda, Arun ( Machanical Engineering - IIT Delhi ) Vrat, Prem ( Machanical Engineering - IIT Delhi ) |
| Wani, Mohd.Farooq | Development of design methodology for maintainability of mechanical systems | Gandhi, O.P. ( Industrail Tribology Machine Dynamics - IIT Delhi ) |
| Madhan Mohan, T. | Technology optimization of evanescent wave fiber optic biosensor for the detection of bancroftian filariasis | Anand, Sneh ( Centre for Biomedical Engineering - IIT Delhi ) |
| Eshwaraiah, Punna | Some studies on computer aided process planning for prismatic components | Rao, P.V.Madhusudhan ( Mechanical Engineering - IIT Delhi ) |
1998
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Achyutrao, Deshpande Ajay | Impact of aviation related emissions on ambient suspended particulate concentration in the vicinity of an Indian airport | Mathur, H.B. ( Mechanical Engineering - IIT Delhi ) |
| Nanda, Sanju ;Ms. | Mechanistic and experimental approaches to sonophoretic transdermal delivery of propranolol hydrochloride | Anand, Sneh ( Biomedical Engineering - IIT Delhi ) |
| Banerjee, Rathin Kumar | Boundary lubrication mechanisms in plastic deformation | Sethuramiah, A. ( Industrail Tribology Machine Dynamics - IIT Delhi ) Jagga, C.R. ( Industrail Tribology Machine Dynamics - IIT Delhi ) |
| Maheshwari, Sachin | Element transfer behavior of fluxes during submerged Arc welding | Pandey, Sunil ( Mechanical Engineering - IIT Delhi ) |
| Hirani, Harish | Theoretical and experimental studies on design of dynamically loaded journal bearing | Athre, K. ( Mechanical Engineering - IIT Delhi ) Biswas, S. ( Industrail Tribology Machine Dynamics - IIT Delhi ) |
| Bhagwat, Rajat | Study on decision and information delays in CIM systems | Wadhwa, Subhash ( Mechanical Engineering - IIT Delhi ) |
| Kohli, Anil Kumar | Tribological behaviour of selected radiation resistant solid lubricants under dry and water-submerged conditions | Prakash, Braham ( Industrail Tribology Machine Dynamics and Maint. Engg. - IIT Delhi ) |
| Ravi, Shankar | Some issues in cellular manufacturing systems design with vague information | Vrat, Prem ( Mechanical Engineering - IIT Delhi ) |
| Ali Abdulmajeed, Ali | Studies on some issues for design and planning of cellular manufacturing systems | Vrat, Prem ( Mechanical Engineering - IIT Delhi ) |
| Tiwari, Mayank | Dynamics of rotors supported on deep groove ball bearings | Gupta, K. ( Mechanical Engineering - IIT Delhi ) Prakash, Om ( Industrail Tribology Machine Dynamics - IIT Delhi ) |
| Sahambi, Jyotindra Singh | Wavelet transforms for ECG characterization | Tandon, S.N. ( Centre for Biomedical Engineering - IIT Delhi ) Bhatt, R.K.P. ( Electrical Engineering - IIT Delhi ) |
| Choudhury, Achintya | Vibration and acoustic emmission response of rolling element bearings with defects | Tondon, N. ( Chief design Engineer,Industrail Tribology Machine Dynamics - IIT Delhi ) |
1997
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Singh, Gulshan Jit | Response of the vas deferens to physical interventions in surgery | Guha, S.K. ( Centre for Biomedical Engineering - IIT Delhi ) Malik, T.K. ( Maulana Azad Medical College - New Delhi ) |
| Najibullah, Khwaja Omary | Assessment of newly developed gasoline fuel injection systems for a single cylinder sparkignition engine | Subrahmanyam, J.P. ( Mechanical Engineering - IIT Delhi ) Babu, M.K.Gajendra ( Centre for Energy Studies - IIT Delhi ) |
| Arora, Vijay | Setup planning and fixture design for computer aided process planning | Rao, U.R.K. ( Mechanical Engineering - IIT Delhi ) |
| Aravind, A.S. | Articular cartilage in relation to loading and articulation | Sahay, K.B. ( Centre for Biomedical Engineering - IIT Delhi ) Saxena, R.K. ( Centre for Biomedical Engineering - IIT Delhi ) |
| Regalla, Srinivasa Prakash | Evaluation of boundary friction under plastic deformation for metal forming processes | Rao, U.R.K. ( Mechanical Engineering - IIT Delhi ) Sethuramaiah, A ( Industrail Tribology Machine Dynamics - IIT Delhi ) |
| Chowdary, B.V. | Flexibility and related issues in evaluation and selection of manufacturing systems | Kanda, Arun ( Mechanical Engineering - IIT Delhi ) Rao, K.Surya Prakasa ( Mechanical Engineering - K.L College of Engineering,Nagarjuna University,And |
| Chatterjee, Samir | Dynamic analysis of dual rotor system with an intershaft sqweeze film damper | Gupta, K. ( Mechanical Engineering - IIT Delhi ) |
| Biswas, Subrata | Bio-physical aspects of non-prealigned rapid human erythrocyte homo-electrofusion and erythrocyte-placental amnion hetero electrofusion | Guha, Sujoy k. ( Centre for Biomedical Engineering - IIT Delhi ) |
| Nidhi Nath | Technology of evanescent wave fibre optic immunosensor for serodiagnosis of visceral leishmaniasis | Sneh Anand ( CBME, IIT Delhi ) |
| Rao, Kota Kameswara | Vibratory stress analysis of turbine blades using shell finite elements | Gupta, K ( mechanical Engineering, IIT Delhi )Ramakrishnan, C.V. ( Applied Mechanics,IIT Delhi ) |
| Aggarwal, Abhinav | Flexibility, integration and automation framework to assist CIM development: an IT effectiveness perspective | Tewari, N.K. ( Mechanical Engineering, IIT Delhi )Wadhwa, Subhash ( Mechanical Engineering, IIT Delhi ) |
| Abdul Khaliq, G | Some studies on pulse gas metal ARC welding(PGMAW) of Aluminium alloy | Parmar, R.S. ( Mechanical Engineering,IIT Delhi ) |
| Gupta, Anita ;Ms. | Pressure pu;lsation and condition monitoring studies of multistage reciprocating compressor | Yadava, G.S. ( ITMMEC, IIT Delhi ) |
| Ashok Babu, T.P. | A theoretical and experimental investigation of alternatives to CFC 12 in refrigerators | Arora, C.P. ( Mechanical Engineering,IIT Delhi ) |
| Prabhuswamy, M.S, | Studies in reliability based optimization of manufacturing systems. | Chawla, O.P. ( ITMMEC, IIT Delhi ) |
| Soni, Shyam Lal | Compresses natural gas(CNG) fuelled spark ignition engine-gas injection,combustion,performance and exhaust emission studies | Mathur, H.B. ( Mechanical Engg.,IIT Delhi ) |
1996
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Abid Haleem | Steel planning and policy evaluation: a flexible systems management approach | Kanda, Arun ( Mechanical Engineering - IITD ) |
| Papney, L.D. | Thermal performance of a water body due to heated water discharge from the power plants | Gupta, S.K. ( Mechanical Engineering - IITD ) |
| Poonia, M.P. | Investigations on combustion and performance optimization of a dual fuel engine using LPG and diesel | Gaur, R.R. ( Mechanical Engineering - IITD ) Ramesh, A. ( Mechanical Engineering - IIT, Madras ) |
| Manepatil, Smita ;Ms. | Simulation and condition monitoring studies on reciprocating compressor | Nakra, B.C. ( Mechanical Engineering - IITD ) |
| Pathak, B.D. | Some studies of flow through inward flow radial cascade | Yahya, S.M. ( Mechanical Engineering - IITD ) Rai, Lajpat ( Mechanical Engineering - IITD ) |
| Mahyavanshi, B.K. | Some studies in an annular turbine cascade with tip clearance | Yahya, S.M. ( Mechanical Engineering - IITD ) Agrawal, D.P. ( Mechanical Engineering - IITD ) |
| Ajaz Hussain Mir | Towards automated detection and classification of diseases using CT images | Tandon, S.N. ( CBME - IITD ) |
| Gupta, Vijay Kumar | Submerged ARC welding of microalloyed steel | Parmar, R.S. ( Mechanical Engineering - IITD ) |
1995
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Venkatasamy, R. | Total system design and analysis of automobile vehicles | Agrawal, V.P. ( Mechanical Engineering - IITD ) |
| Ramaswamy, M | A study on mixtures of non-CFC refrigerants alternative to CFC-12 for refrigeration systems. | Agarwal, R.S. ( Mechanical Engineering - IITD ) Srivastava, V.K. ( Chemical Engineering - IITD ) |
| Ghiyasvand, M S | A study of control signals for below elbow arm prostheses. | Guha, Sujoy Kumar ( CBME - IITD ) Sneh Anand ( CBME - IITD ) |
| Rao Kamargiri, V S | Forced vibration response for rotor blade due to aerodynamic interaction in a turbomachine stage. | Rao, J.S. ( Mechanical Engineering - IITD ) Seshadri, V. ( Applied Mechanics - IITD ) |
| Subhash Chander | Dynamic analysis of some flexible manipulators. | Pujara, K.K. ( Mechanical Engineering - IITD ) Gupta, K.N. ( Mechanical Engineering - IITD ) |
| Kachhwaha, Surendra Singh | Some studies on spray type evaporative cooling process. | Dhar, P.L. ( Mechanical Engineering - IITD ) Kale, S.R. ( Mechanical Engineering - IITD ) |
| Srivastava, Sangeeta ;Ms. | Enhancement of the mechanical integrity of thim films by ion beams . | Jain, Amitabh ( ITMMEC - IITD ) |
| Singh, Dinesh Kumar | Chemical modification of Chitosan for biomedical applications. | Ray, Alok R. ( CBME - IITD ) |
| Sengupta, Amit | Biotechnological study of pathophysiology of the uteroplacental system in pregnancy and its related complication of pre-eclampsia. | |
| Purohit, G K | Fracture and fatigut characteristics of ARC welded structural steels. | Pandey, R.K. ( Applied Mechanics - IITD ) Parmar, R.S. ( Mechanical Engineering - IITD ) |
| Manidhar, G | Some studies in the design and development of a CAPP system for rotational parts with c-axis features. | Rao, P.N. ( Mechanical Engineering - IITD ) |
| Asok Kumar, N | Numerical simulation of heat transfer to gas turbine blades. | Kale, S.R. ( Mechanical Engineering - IITD ) |
| Rao, K V Sambasiva | Some studies on the justification problem and allied issues for implementation of advanced manufacturing technologies. | Deshmukh, S.G. ( Mechanical Engineering - IITD ) |
| Sridhar, V | A study of functional electrical Cochlear stimulation: an extra-cochlear approach. | Guha, S.K. ( CBME - IITD ) Sneh Anand ( CBME - IITD ) |
| Chakrabarti, Barun | Development of an expert system for fault diagnosis of turbo generators. | Gupta, K.N. ( ITMMEC - IITD ) Yadava, G.S. ( ITMMEC - IITD ) |
| Sri Krishna, S | Development of maintenance methodology for coal-based power plant auxiliaries. | Rao, P.N. ( Mechanical Engineering - IITD ) Yadava, G.S. ( ITMMEC - IITD ) |
| Madan, Pawan Kumar | Studies on processing of metal matrix composites. | Sagar, R. ( Mechanical Engineering - IITD ) |
| Seyedan, Babak | Simulation and optimization studies of a combined cycle power plant. | Gaur, R.R. ( Mechanical Engineering - IITD ) Dhar, P.L. ( Mechanical Engineering - IITD ) |
| Sushil Kumar | Graph theoretic modelling and analysis for performance evaluation of human machine systems. | Mahajan, J.M. ( Mechanical Engineering - IITD ) Agarwal, V.P. ( Mechanical Engineering - IITD ) |
1994
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Ramana, C N V | Studies on vibrations of turbine blades with friction pins. | Gupta, K. ( Mechanical Engineering - IITD ) |
| Sundararaman, Velandai K | A study of the functional changes in human skeletal muscle by imaging methodologies. | Guha, S.K. ( CBME - IITD ) |
| Jain, Sanjeev | Studies on desicant augmented evaporative cooling systems | Dhar, P.L. ( Mechanical Engineering - IITD ) Kaushik, S.C. ( CES - IITD ) |
| Doraiswami, Ravi | Application of laser speckle and acoustic emission techniques to study crack propagation. | Sethuramiah, A. ( ITMMEC - IITD ) |
| Narendra Kumar | On development and analysis of decision support systems for unit exchange spares management | Sushil ( Department of Management Studies - IITD ) Prem Vrat ( Mechanical Engineering - IITD ) |
| Sahay, Bidya Shanker | Strategic planning and policy modelling for Indian fertiliser industry- a system dynamics approach | Prem Vrat ( Department of Management Studies - IITD ) Jain, P.K. ( Department of Management Studies - IITD ) |
| Murthy, D V S | Modified polyalkenoate cements for dental applications. | Tewari, U.S. ( ITMMEC - IITD ) |
| Chaturvedi, Kaushal kishore | Deformation and heat transfer effects in conventional and water-cooled spring-supported tilting-pad thrust bearings. | Biswas, S. ( ITMMEC - IITD ) |
| Prasad, A V S R K | Optimal selection of cutting-process parameters in a computer aided process planning system | Rao, U.R.K. ( Mechanical Engineering - IITD ) Rao, P.N. ( Mechanical Engineering - IITD ) |
| Ananta Ravi, Samavedam Srinivasa | Structural dynamic modifications and design sensitivity analysis of structures with viscoelastic damping treatment | Kundra, T.K. ( Mechanical Engineering - IITD ) Nakra, B.C. ( Mechanical Engineering - IITD ) |
1993
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Loganathan, S | Structure and strengthening of evaporated chromium films | Jain, Amitabh ( ITMMEC - IITD ) |
| Balachandra, Satish | Intracranial system response to volume perturbations: theoretical and experimental studies | Sneh Anand ( CBME - IITD ) |
| Sanjeev, V | An investigation into the broaching process | Rao, U.R.K. ( Mechanical Engineering - IITD ) |
| Sibal, Vinod Kumar | Studies to improve the effectiveness of freight trains in the context of Indian Railways | Kanda, Arub ( Mechanical Engineering - IITD ) |
| Goel, Yashvir Singh | Computer aided modelling of heat rejection system of a thermal power plant | Sharma, P.B. ( Mechanical Engineering - IITD ) Srivastava, V.K. ( Chemical Engineering - IITD ) |
| Sharma, Narinder Kumar | Studies on freeze drying of Yoghurt | Arora, C.P. ( Mechanical Engineering - IITD ) |
| Bangroo, Pran Nath | New extraction systems for the analysis of metals in minerals and oils | Jagga, C.R. ( ITMMEC - IITD ) |
| Murugan, N | Some studies on metal surfacing | Sud, S.K. ( IDDC - IITD ) Parmar, R.S. ( Mechanical Engineering - IITD ) |
| Jasthi Siva Rama Krishna | Some studies on form features in the development of a CAPP system | Tewari, N.K. ( Mechanical Engineering - IITD ) Rao, P.N. ( Mechanical Engineering - IITD ) |
| Mistry, Kishore N | Investigation of cavitation and thermohydrodynamic study in a journal bearing | Biswas, S. ( ITMMEC - IITD ) |
| Mandal, Amitava | Pulsed MIG welding of high strength low alloy steels | Parmar, R.S. ( Mechanical Engineering - IITD ) |
| Karmakar, Santanu Kumar | Response of dynamically stressed material in sliding | Sethuramiah, A. ( ITMMEC - IITD ) |