People
Alumni (Ph.D.)
1992
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Gita, P.K. ;Ms. | Bioabsorbable antimicrobial polymers based on polyglycolic and polylactic acid | Nigam, J.K. ( ShriRam Institute of Industrial Research - Delhi ) |
| Nasrolla bani Mostafa | Flux cored arc welding of high strength low alloy steel | Parmar, R.S. ( Mechanical Engineering - IITD ) |
| Sinha, Amarendra Nath | Thermoelastohydrodynamic analysis of spring supported large thrust pad bearing | Athre, K. ( Mechanical Engineering - IITD ) Biswas, S. ( ITMMEC - IITD ) |
| Md. Rafiqul Islam | Studies on the simulation of an alcohol fueled low heat rejection direct injection diesel engine | Subrahmanyam, J.P. ( Mechanical Engineering - IITD ) Babu, Gajendra ( CES - IITD ) |
| Rajeev Vijay | Studies in capacity expansion and traffic assignment for road networks | Vrat, Prem ( Mechanical Engineering - IITD ) Kanda, Arun ( Mechanical Engineering - IITD ) |
| Singh, Satinder Paul | Some studies on dynamics of composite shafts | Gupta, K. ( Mechanical Engineering - IITD ) |
| Waleed, Abbas Fadhel | Nucleate pool boiling of refrigerant 22-dimethylformamide mixtures over a horizontal tube bundle | Agarwal, R.S. ( Mechanical Engineering - IITD ) |
| Sharma, H D | Multilevel futures research srudy of management | |
| Pankaj | On designing expert support systems using system dynamics and fuzzy sets | Seth, Kiran ( Mechanical Engineering - IITD ) Sushil ( Department of Management Studies - IITD ) |
| Dutt, Jayant Kumar | Studies on dynamics of rotating systems with viscoelastically damped supports | Nakra, B.C. ( Mechanical Engineering - IITD ) |
| Hussain, A J | Thermal effects in non-circular bearing | Biswas, S ( ITMMEC - IITD ) |
| Srihari, Thodeti | Submerged arc welding of high strength low alloy steels | Parmar, R.S. ( Mechanical Engineering - IITD ) |
1991
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Ajit Kumar | A holistic study of rural energy system | Gaur, R.R. ( Mechanical Engineering - IITD ) Dhar, P.L. ( Mechanical Engineering - IITD ) |
| Gandhi, Om Prakash | Reliability and wear analysis and lubricant selection- a structural approach | Agrawal, V.P. ( Mechanical Engineering - IITD ) Shishodia, K.S. ( Applied Mechanics - IITD ) |
| Koul, Saroj ;Ms. ( nee Ambardar ) | Corporate policy analysis of an engineering enterprise: a system dynamics study | Vrat, Prem ( Mechanical Engineering - IITD ) |
| Jai Paul | Synthesis and characterization of biocompatible polyamides | Ray, Alok R ( CBME - IITD ) |
| Swamy, K N Shadakshara | Thermal effects in hydro dynamic lubrication | Athre, K ( Mechanical Engineering - IITD ) |
| Nyangaya, James Akuno | Ethanol fuel substitution through blending and fumigation in direct injection compression ignition engine performance and combustion studies | Mathur, H.B. ( Mechanical Engineering - IITD ) |
| Rao, D Nageswara | Investigations into tool-wear monitoring in turning | Rao, U.R.K. ( Mechanical Engineering - IITD ) Rao, P.N. ( Mechanical Engineering - IITD ) |
| Nanda, Dulal Das | Some studies on hyperbaric welding | Parmar, R.S. ( Mechanical Engineering - IITD ) |
| Gupta, Vijay Kumar | Computer integrated manufacturing of precision engineering components | Sagar, R. ( Mechanical Engineering - IITD ) |
| Om Prakash | Some studies onb condition monitoring and dynamics of centrifugal pumps | Gupta, K. ( Mechanical Engineering - IITD ) Nakra, B.C. (Mechanical Engineering - IITD) |
1990
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Saluja, Ashok Kumar | Condensation of R12-R13 mixtures inside a horizontal tube | Agarwal, R.S. ( Mechanical Engineering - IITD ) Dhar, P.L. ( Mechanical Engineering - IITD ) |
| Bhowmick, Ashish | Synthesis characterization and biomedical application of polyurethaneurea | Ray, Alok R ( CBME - IITD ) |
| Mohna, V K | Kineto-elasto dynamic analysis of spatial mechanisms | Asnani, N.T. ( Mechanical Engineering - IITD ) |
| Kapur, Rai Bahadur | Investigations in transverse cold rolling | Juneja, B.L. ( Mechanical Engineering - IITD ) |
| Thankappan, K V | Investigation of swirling compressible flow through wedge vaned radial diffusers for centrifugal compressors | Yahya, S.M. ( Mechanical Engineering - IITD ) Agrawal, D.P. ( Mechanical Engineering - IITD ) |
| Srivastava, Ravindra Kumar | Modal identification and optimal modification of systems via dynamic stiffness and sensitivity analysis | Kundra, T.K. ( Mechanical Engineering - IITD ) |
| Singh, Jagbir | Synthesis and characterization of polymeric hydrogels for biomedical applications | Ray, Alok R ( CBME - IITD ) |
| Saxena, Rajendra Kumar | A biomechanical and biochemical study of articular cartilage | Guha, S.K. ( CBME - IITD ) |
| Tandon, Naresh | Experimental studies on vibration and acoustic response of rolling element bearings with simulation defects | Nakra, B.C. ( ITMMEC - IITD ) |
| Noorul Haq, A | Modelling and analysis of integrated production inventory distribution systems | Vrat, Prem ( Mechanical Engineering - IITD ) Arun Kumar ( Mechanical Engineering - IITD ) |
| Makwana, Keshav Chaturbhai | Kineto-elastodynamic analysis of planar four-bar mechanism | Gupta, K.N. ( Mechanical Engineering - IITD ) |
| Mukherjee, Sraban | Optimal maintenance policies under incomplete state information | Seth, Kiran ( Mechanical Engineering - IITD ) |
| Mange Ram | Investigation of asperity level conformity in EHD lubrication | Sethuramiah, A. ( ITMMEC - IITD ) |
| Tyagi, Permod Kumar | Development and modification of biostable sutures | Singh, Harpal ( CBME - IITD ) |
| Vij, Anil Kumar | Energy policy modelling and analysis for the Indian Economy | Vrat, Prem ( Mechanical Engineering - IITD ) Sushil ( Department of Management Studies - IITD ) |
| Shrivastava, Sadhna ;Ms | Structure and properties of nitrogen ion implanted 304 stainless steel | Jain, Amitabh ( ITMMEC - IITD ) Chopra, K.L. (Physics - IITD) |
1989
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Prevendra Kumar | Some studies in multiobjective optimization of production planning problems in flexible manufacturing systems | Tewari, N.K. ( Mechanical Engineering - IITD ) Singh, N. ( Industrial Engineering - Universsity of Windsor, Ontario, Canada ) |
| Gupta, Kapil Deo P | Unbalance response and stability of dual rotor system | Athre, K. ( Mechanical Engineering - IITD ) Gupta, K. ( Mechanical Engineering - IITD ) |
| Krishnan, V R | Studies on underwater hyperbaric pulsed gas metal ARC welding | Parmar, R.S. ( Mechanical Engineering - IITD ) |
| Khatri, Kamal N | Vibration and damping analysis of multilayered conical shells | Asnani, N.T. ( Mechanical Engineering - IITD ) |
| JanakiRam, Dharanipragada | Expert system approach to integration of design with manufacture | Rao, U.R.K. ( Mechanical Engineering - IITD ) Prasad, L.V. ( Mechanical Engineering - IITD ) |
| Patel, Mulchand Bhai | Human resource development in the midst of changing technologies in Indian cement industry | Mahajan, J.M. ( Mechanical Engineering - IITD ) Rao, U.R.K. ( Mechanical Engineering - IITD ) |
| Jawahar, P Mannar | Mathematical simulation for lateral dynamics of conventional and unconventional railway tracks | Gupta, K.N. ( Mechanical Engineering - IITD ) |
| Singh, Jagbir | Some studies on balancing of flexible rotors | Gupta, K.N. ( Mechanical Engineering - IITD ) |
| Sorayan, V P S | An analysis of elastic-plastic deformation in presence of temperature field | Mishra, A. ( Mechanical Engineering - IITD ) |
| Sachdeva, Bakshi Lal | Studies on dynamic of rigidly/flexibly coupled pneumatic free-piston machines | Gupta, K.N. ( Mechanical Engineering - IITD ) |
| Padmanabham, G | Modelling of inventory systems under inflation, perishability and stock dependent consumption | Vrat, Prem ( Mechanical Engineering - IITD ) |
| Mukesh Kumar | Some studies on MIG welding of Al-Zn-Mg alloy(7005) | Parmar, R.S. ( Mechanical Engineering - IITD ) |
| Jain, Yashpal | Stalling behaviour of a contrarotating axial compressor stage | Sharma, P.B. ( Mechanical Engineering - IITD ) Rai, Lajpat ( Mechanical Engineering - IITD ) |
| Pande, Dwarika Prasad | Thermal-hydraulic studies of thermosyphon evaporators | Dhar, P.L. ( Mechanical Engineering - IITD ) Agarwal, R.S. ( Mechanical Engineering - IITD ) |
| Nowesar Mohammed Abdel Gawad Ashour | Distortion of a thrust pad bearing on elastic support | Biswas, S ( ITMMEC - IITD ) Athre, K ( Mechanical Engineering - IITD ) |
| Bijwe, Jayashree ;Ms. | Friction and wear of engineering polymers: studies on polyimides composites | Tewari, U.S. ( ITMMEC - IITD ) P. Vasudevan (CRDT - IITD) |
| Nanda, Santosh Kumar | Seasonally adjusted discrete mirror linear solar concentrators | Mullick, S.C. ( CES - IITD ) |
1988
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Dinesh Kant Kumar | A neuromotor control model for spasticity: an experimental verification | Dinesh Mohan ( CBME - IITD ) |
| Yadava, Gajraj Singh | Studies on pressure pulsations and condition monitoring of reciprocating compressor | Nakra, B.C. ( ITMMEC - IITD ) Chawla, O.P. (ITMMEC - IITD) |
| Abdul Basit Khan | Studies in macro level analysis and design of management information | Vrat, Prem ( Mechanical Engineering - IITD ) |
| Aduru, Chandra Sekhar Kumar | Studies on the redress life of the grinding wheel and optimization of the west surface grinding process | Rao, U.R.K. ( Mechanical Engineering - IITD ) |
| Mital, Krishna Mohan | Modelling and analysis of corporate manpower planning process for time-dependant career growth policy | Vrat, Prem ( Mechanical Engineering - IITD ) Sushil ( Department of Management Studies - IITD ) |
| Kurien, K.C. | Reliability and availability analysis of repairable system using discrete event simulation | Chawla, O.P. ( ITMMEC - IITD ) G.S. Sekhon (Applied Mechanics - IITD) |
| Sharma, Gyanendra Kumar | Lube oil alkalinity and its modelling in diesel engines | Chawla, O.P. ( ITMMEC - IITD ) |
| Khandare, Sheshikant Shrikumar | Some investigations on the use of pulverised coal as substitute fuel in a diesel engine | Garg, R.D. ( Mechanical Engineering - IITD ) Gaur, R.R. ( Mechanical Engineering - IITD ) |
1987
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Bharath, S | Mathematical modelling and analysis of railway pneumatic brake system | Gupta, K.N. ( Mechanical Engineering - IITD ) Nakra, B.C. ( Mechanical Engineering - IITD ) |
| Satyanarayana, Beela | Some aspects of an interactive programming system to NC milling | Tewari, N.K. ( Mechanical Engineering - IITD ) Rao, P.N. ( Mechanical Engineering - IITD ) |
| Agnihotri, Geeta ;Ms. | Stress analysis of crack in presence of residual stress field using the finite element method | Mishra, A. ( Mechanical Engineering - IITD ) |
| Yenduru, Nagendra Prasad | Theoretical and experimental investigations on the performance and emission characteristics of compression ignition engines with biogas substitution | Mathur, H.B. ( Mechanical Engineering - IITD ) Gajendra Babu, M.K. ( CES - IITD ) |
| Saxena, Mukesh | Experimental and analytical studies on 'stratified charging' and 'selective exhaust gas recirculation' in crankcase scavenged two-stroke S.I. Engine for reduction of hydrocarbon emissions and specific fuel consumption | Mathur, H.B. ( Mechanical Engineering - IITD ) |
| Guha, Asim Kumar | Attitude towards technology transfer and related factors | Mathur, Purnima; Ms ( Humanities and Social Sciences - IITD ) |
| Nanda, Raj Kumar | Resonant response of beams and rectangular plates with discrete viscoelastic dampers and absorbers | Nakra, B.C. ( Mechanical Engineering - IITD ) |
| Sarma, K V Bhaskara | Unbalance response and stability of symmetric and asymmetric rotors | Rao, J.S. ( Mechanical Engineering - IITD ) Gupta, K. ( Mechanical Engineering - IITD ) |
1986
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Naidu, M Munirathnam | Some studies in lot sizing for material requirements planning systems | Singh, Nanua ( Mechanical Engineering - IITD ) |
| Sardana, Guru Datt | Studies in productivity measurement through performance objectives: A goal programming approach | Vrat, Prem ( Mechanical Engineering - IITD ) |
| Ambekar, Ashok G | Identification, classification and isomorphism of kinematic chains and mechanisms via identification codes | Agrawal, V.P. ( Mechanical Engineering - IITD ) |
| Reddy, D Narasimha | Some studies on swirling compressible flow through a vaneless radial diffuser | Yahya, S.M. ( Mechanical Engineering - IITD ) Agrawal, D.P. ( Mechanical Engineering - IITD ) |
| Das, Lalit Mohan | Studies on timed manifold injection in hydrogen operated spark ignition engine: performance, combustion and exhaust emission characteristics | Mathur, H.B. ( Mechanical Engineering - IITD ) |
| Jain, Komal Chandra | Investigation in surface grinding of hardened En 24 steel | Juneja, B.L. ( Mechanical Engineering - IITD ) Mittal, R.N. ( Mechanical Engineering - IITD ) |
| Balasubramonian, A | Some studies on the elasrodynamic behaviour of unbalanced and counterweighted four-bar mechanisms | Raghavacharyulu, E. ( Mechanical Engineering - IITD ) |
| Salem Mohammed Bin Gadhi | Thermodynamic and heat transfer studies on alcohol-salt mixtures for vapour absorption refrigeration systems | Kaushik, S.C. ( CES - IITD ) Agarwal, R.S. ( Mechanical Engineering - IITD ) |
| Dorairaj, S | A nucleate pool boiling study of refrigerant-22 - dimethyl formamide mixtures | Gupta, S.K. ( Mechanical Engineering - IITD ) Agarwal, R.S. ( Mechanical Engineering - IITD ) |
| Seshasayee, K R | Some studies in the design of a two-echelon repair-inventory system in the presence of forbidden regions | Singh, Nanua ( Mechanical Engineering - IITD ) |
| Verma, Anand Prakash | Applications of multicriteria decision-making techniques for joint optimization of dressing and surface grinding conditions | Rao, U.R.K. ( Mechanical Engineering - IITD ) Singh, N. ( Mechanical Engineering - IITD ) |
| Usmani, Mohamed Abdul Wasay | Interface damping in blade attachment region | Rao, J.S. ( Mechanical Engineering - IITD ) Ramakrishnan, C.V. ( Applied Mechanics - IITD ) |
| Khanna, Indra Kumar | Transportation planning and policy design for Delhi urban region: - a system dynamics approach | Vrat, Prem ( Mechanical Engineering - IITD ) Singh, N. ( Mechanical Engineering - IITD ) |
| Vinod Krishna | Mathematical modelling and optimization of heat rate of a thermal power plant | Gupta, S.K. ( Mechanical Engineering - IITD ) Sharma, P.B. ( Mechanical Engineering - IITD ) |
| Singh, Prabhat Kumar | An analysis of two and three dimensional stress state in single edge cracked plate | Mishra, A. ( Mechanical Engineering - IITD ) |
| Saxena, Prem Kumar | Transportation techniques in fractional and related programming problems | Suresh Chandra ( Mathematics - IITD ) Seth, Kiran ( Mathematics - IITD ) |
| Kundra, Tejinder Kumar | Studies in identification and modification of dynamic mechanical systems | Nakra, B.C. ( Mechanical Engineering - ITMMEC, IITD ) |
| Vyas, Malimaksh Sharadchandra | Vibratory stress analysis and fatigue life estimation of turbine blade | Rao, J.S. ( Mechanical Engineering - IITD ) |
| Pandey, Sunil | Some studies on MIG wlding of aluminium and it's alloy | Parmar, R.S. ( Mechanical Engineering - IITD ) |
| Narinder Kumar | Stability of boundary film on metals and metal oxide in piston ring-linear lubrication | Chawla, O.P. ( ITMMEC - IITD ) Sharma, J.P. (ITMMEC - IITD) |
1985
| Name | Thesis / research title | Supervisor(s) |
|---|---|---|
| Chandrasekaran, S | Some studies on the effect of abrasive contaminants in lubricants on scuffing using a four ball machine | Khemchandani, M.V. ( Mechanical Engineering - IITD ) Sharma, J.P. (ITMMEC - IITD) |
| Rao, Nanduri Gajanana | Memconsult: an approach to user-oriented computer-assisted decision making in medicine for differential diagnosis and treatment | Reddy, P.G. ( School of Math. and Comp.Sc.,Univ. of Hyderabad - Hyderabad ) |
| Rathore, Kailash Chandra | Studies on mesophlic anaerobic digestion of water hyacinth for biogas production | Mathur, H.B. ( Mechanical Engineering - IITD ) |
| Sayed Mohd. Haider | An investigation of some transverse rolling processes | Juneja, B.L. ( Mechanical Engineering - IITD ) |
| Sharma, Sunil Kumar | Physico-chemical studies of polymeric lubricants | Tewari, U.S. ( ITMMEC - IITD ) Vasudevan, P. (CRDT - IITD) |
| Singhai, K C | Studies on ethanol carburation in compression ignition engines performance, combustion and exhaust emission characteristics | Mathur, H.B. ( Mechanical Engineering - IITD ) |
| Kanda, Arun | Studies with renewable and non-renewable resources | Rao, U.R.K. ( Mechanical Engineering - IITD ) Satsangi, P.S. ( Electrical Engineering - IITD ) |
| Utgikar, Purushottam Shrikrishan | Investigations on vaned radial diffusers with diverging walls | Yahya, S.M. ( Mechanical Engineering - IITD ) Agrawal, D.P. ( Mechanical Engineering - IITD ) |
| Ravindranath, K | Some studies in facilities location planning in the presence of forbidden regions | Vrat, Prem ( Mechanical Engineering - IITD ) Singh, N. ( Mechanical Engineering - IITD ) |